SM4209 Datasheet | Solid State Optronic

Description The SM4209 consists of an input drive LED optically coupled to a photodiode array output designed to drive highly capacitive loads, including the gate of a power MOSFET. The active discharge circuit of the PDA assures quick discharge of MOSFETs, providing fast turn-off times. This device can be used in a wide variety of applications for which high levels of input are required for a MOSFET output. The SM4209 es standard in a miniature 4 pin SOP package. Applications - Isolated means to drive discrete power MOSFETs - Lighting Controls - Process Control Modules - Solid State Relays - Solenoid Controls Schematic Diagram Features - Miniature 4 pin SOP package - Built in active discharge circuit for fast turn-off - Fast Turn-On - 12V Gate Drive Voltage - High Input-to-Output Isolation (1.5k VRMS) - Long Life / High Reliability - Ro HS / Pb-Free / REACH pliant Agency Approvals UL / C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Storage Temperature …………………………..-55 to +125°C Operating Temperature …….…..……...………-40 to +85°C Continuous Input Current ………………………………..50m A Transient Input Current ………………….……………..500m A Reverse Input Control Voltage …………..…………………5V Input Power Dissipation…………………………………70m W Total Power Dissipation ……………………………..170m W Solder Temperature - Wave (10sec)……………….….260°C Solder Temperature - IR Reflow (10sec)….…………..260°C Ordering Information Part Number Description SM4209 SM4209-TR 4 pin SOP, (100/Tube) 4 pin SOP, Tape and Reel (2000/Reel) © 2013 Solid State Optronics - San José, CA .ssousa. - +1.408.293.4600 NOTES: Suffixes listed above are not included in marking on device...