900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Skyworks Solutions

CLA4603-085LF Datasheet Preview

CLA4603-085LF Datasheet

Surface Mount Limiter Diode

No Preview Available !

DATA SHEET
CLA4603-085LF: Surface Mount Limiter Diode
Applications
Low-loss, high-power limiters
Receiver protectors
Anode
(Pin 1)
Anode
(Pin 3)
Features
Low thermal resistance: 96 °C/W
Typical threshold level: +9 dBm
Low capacitance: 0.33 pF
Low profile, ultra-miniature QFN (3-pin, 2 x 2 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Cathode
(Pin 2, Exposed Paddle)
Figure 1. CLA4603-085LF Block Diagram
Description
The CLA4603-085LF is a surface mountable, low capacitance
silicon PIN limiter diode designed as a shunt connected PIN diode
for high power limiter applications from 10 MHz to over 6 GHz.
Maximum resistance at 10 mA is 2 Ω and maximum capacitance
at 6 V is 0.4 pF. The combination of low junction capacitance, low
parasitic inductance, low thermal resistance, and nominal 1.5 μm
I-region width, makes the CLA4603-085LF useful in large signal
limiter applications. The threshold level is +9 dBm, nominal.
A block diagram of the CLA4603-085LF is shown in Figure 1. The
absolute maximum ratings of the CLA4603-085LF are provided in
Table 1. Electrical specifications are provided in Table 2.
Typical performance characteristics of the CLA4603-085LF are
provided in Table 3 and illustrated in Figures 4 and 5.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201637G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 12, 2014
1




Skyworks Solutions

CLA4603-085LF Datasheet Preview

CLA4603-085LF Datasheet

Surface Mount Limiter Diode

No Preview Available !

DATA SHEET • CLA4603-085LF: SURFACE MOUNT LIMITER DIODE
Table 1. CLA4603-085LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Reverse voltage
VR 45 V
Forward current @ 25 °C
IF
1.5 A
CW power dissipation @ 85 °C
PD
1W
Peak pulse power dissipation@ 85 °C (10% duty cycle)
10 W
Storage temperature
TSTG
–65 +200
C
Junction temperature
TJ
175 C
Operating temperature
TA
–55 +150
C
Electrostatic discharge:
ESD
Charged Device Model (CDM), Class 4
Human Body Model (HMB), Class 1C
Machine Model (MM), Class A
1000 V
1000 V
150 V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. CLA4603-085LF Electrical Specifications (Note 1)
(TA = +25 C Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Breakdown voltage
VB IR = 10 μA
Reverse current
IR VR = 16 V
Capacitance
CT f = 1 MHz, VR = 6 V
Series resistance
RS f = 500 MHz, IF = 10 mA
Series inductance
LS
Carrier lifetime
TL IF = 10 mA
I region width
W
CW thermal resistance
θJC Junction-to-case
Peak thermal resistance
θP Single 1 μs pulse width,
junction-to-case (10%
duty cycle)
Note 1: Performance is guaranteed only under the conditions listed in this table.
Min
20
Typical
0.33
1.7
0.3
10
1.5
96
9.6
Max
45
1
0.40
2.0
Units
V
μA
pF
Ω
nH
ns
μm
C/W
C/W
Table 3. Typical Performance @ 25 °C
Part Number
Insertion Loss
@ –10 dBm
(dB)
Input Power for
1 dB Loss
(dBm)
Maximum Pulsed
Input Power
(dBm)
Output @ Maximum
Pulsed Input
(dBm)
CLA4603-085LF
0.1
+9
+48
+22
Notes:
Limiter power results @ 1 GHz for shunt connected, single limiter diode and DC return in 50 Ω line.
Maximum pulsed power for 1 μs pulse and 0.1% duty factor with chip @ 25 °C heat sink. Derate linearly to 0 W @ 175 °C.
Maximum CW input power @ 25 °C heat sink. Derate linearly to 0 W @ 175 °C.
Recovery time to insertion loss from limiting state.
Maximum CW
Input power
(W)
3
Recovery Time
(ns)
10
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 November 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201637G


Part Number CLA4603-085LF
Description Surface Mount Limiter Diode
Maker Skyworks Solutions
PDF Download

CLA4603-085LF Datasheet PDF






Similar Datasheet

1 CLA4603-085LF Surface Mount Limiter Diode
Skyworks Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy