Datasheet4U Logo Datasheet4U.com

AAT3152 - High Efficiency 1X/1.5X/2X Charge Pump

General Description

The AAT3152 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.

The AAT3152 is capable of driving four-channel LEDs from a 2.7V to 5.5V input.

Key Features

  • VIN Range: 2.7V to 5.5V.
  • Fully Programmable Current with Single Wire.
  • Eight-Step Current: 20mA to 50µA.
  • Individual Main-Sub Group Control.
  • Low IQ (50µA) at Light Load.
  • Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage.
  • Drives 1-4 Channels of LEDs.
  • No Inductors, Low Noise Operation.
  • 1MHz Constant Switching Frequency.
  • Small.

📥 Download Datasheet

Full PDF Text Transcription for AAT3152 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for AAT3152. For precise diagrams, and layout, please refer to the original PDF.

DATA SHEET AAT3152 High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications General Description The AAT3152 is a low noise, constant frequency charge pump DC/DC ...

View more extracted text
tion The AAT3152 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3152 is capable of driving four-channel LEDs from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher-current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and VOUT) makes this part ideally suited for small, battery-powered applications.