The AAT3142 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.
Key Features
VIN Range: 2.7V to 5.5V.
Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum
Efficiency and VF Coverage.
Drives Low-VF and High-VF Type LEDs.
Up to Three 30mA Outputs.
32-Position Logarithmic Scale with Digital Control.
Full PDF Text Transcription for AAT3142 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AAT3142. For precise diagrams, and layout, please refer to the original PDF.
DATA SHEET AAT3142 High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications General Description The AAT3142 is a low noise, constant frequency charge pump DC/DC ...
View more extracted text
tion The AAT3142 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The device produces current levels up to 30mA on each of its three current source outputs to drive various arrangements of LEDs from a 2.7V to 5.5V input. Outputs may be operated individually or in parallel for driving highercurrent LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and CP) make the AAT3142 ideally suited for small battery-powered applications.
AAT3142 Datasheet
