Datasheet4U Logo Datasheet4U.com

ST3010 - Audio Decoder / Encoder

Description

The ST3010 is a highly integrated and cost-effective 24-bit DSP based audio processor for various consumer applications.

It consists of one powerful DSP for advanced voice decoder and encoder algorithms of natural speech with less memory.

Features

  • 24-bit DSP based voice/audio processor Operation voltage.
  • Core logic: 2.25V~2.7V.
  • I/O pads: 3.0V~3.6V Voltage regulator for core logic Low Voltage Reset (LVR) _ 2.5V low voltage reset One PLL to generate high system frequency from a 3MHz source _ 12M~30MHz PLL output Tow clock sources _ Crystal3MHz _ External input……………………………3MHz Low power down current _Typical current: 3uA One 16-bit programmable Timer One clocking output One external interrupt _ Edge/level trigger supported O.

📥 Download Datasheet

Datasheet Details

Part number ST3010
Manufacturer Sitronix Technology
File Size 345.02 KB
Description Audio Decoder / Encoder
Datasheet download datasheet ST3010 Datasheet

📁 Similar Datasheet

  • ST3010 - (ST30xx) Connector (Hartmann Codier GmbH)
  • ST30100 - (ST3020 - ST30100) Silicon Dual Power Rectifier (Microsemi Corporation)
  • ST30100 - Schottky Barrier Rectifier (INCHANGE)
  • ST301 - Temperature Controller User Handbook (Stafford)
  • ST30120C - SCHOTTKY RECTIFIER (SMC Diode)
  • ST30150C - SCHOTTKY RECTIFIER (SMC Diode)
  • ST3000GXH35A - Silicon N-Channel IEGT (Toshiba)
  • ST300C - PHASE CONTROL THYRISTORS (International Rectifier)
  • ST300S - PHASE CONTROL THYRISTORS (International Rectifier)
  • ST302 - PHOTOTRANSISTORS (Kodenshi)
Other Datasheets by Sitronix Technology

    Full PDF Text Transcription

    Click to expand full text
    www.DataSheet4U.com ST ST3010 Audio Decoder/Encoder Notice: Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice. This is not a final specification. Some parameters are subject to change. 1. FEATURES 24-bit DSP based voice/audio processor Operation voltage – Core logic: 2.25V~2.7V – I/O pads: 3.0V~3.6V Voltage regulator for core logic Low Voltage Reset (LVR) _ 2.5V low voltage reset One PLL to generate high system frequency from a 3MHz source _ 12M~30MHz PLL output Tow clock sources _ Crystal...........................................................3MHz _ External input...……………………………......
    Published: |