Datasheet4U Logo Datasheet4U.com

SP502 - Multi-Mode Serial Transceiver

Description

The SP502 is a highly integrated serial transceiver that allows software control of its interface modes.

It offers hardware interface modes for RS-232 (V.28), RS-422A (V.11), RS-449, RS-485, V.35, and EIA-530.

power BiCMOS process technology, and incorporat

Features

  • nalog output, non-inverted; sourced from ST. Pin 59.
  • SD(b).
  • Analog Out.
  • Send data, non-inverted; sourced from TxD. Pin 61.
  • SD(a).
  • Analog Out.
  • Send data, inverted; sourced.

📥 Download Datasheet

Datasheet Details

Part number SP502
Manufacturer Sipex
File Size 345.19 KB
Description Multi-Mode Serial Transceiver
Datasheet download datasheet SP502 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP5024 3-Wire Bus Controlled Synthesiser Zarlink Semiconductor
SP5026 1.0GHz 3-Wire Bus Controlled Synthesizer Zarlink Semiconductor
SP5000 Efficient ZVS CCFL monitor circuit SI-POWER
SP50001 500MHz Low-loss SAW Filter 45MHz Bandwidth SIPAT
SP5001 IP Telephone Gateway User Manual Micronet

Other Datasheets by Sipex

Part Number Description
SP503 Multiprotocol Transceiver
SP504 WAN Multi-Mode Serial Transceiver
SP505 WAN Multi-Mode Serial Transceiver
SP506 Multi-Protocol Serial Transceivers
SP507 +5V / Single Chip WAN Multi-Mode Serial Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® SP502 Multi–Mode Serial Transceiver ■ Single-Chip Serial Transceiver Supports Industry-Standard ■ Software-Selectable Protocols: — RS-232 (V.28) — RS-422A (V.11, X.27) — RS-449 — RS-485 — V.35 — EIA-530 ■ Programmable Selection of Interface ■ +5V-Only Operation ■ Six (6) Drivers and Seven (7) Receivers ■ Surface Mount Packaging DESCRIPTION… The SP502 is a highly integrated serial transceiver that allows software control of its interface modes. It offers hardware interface modes for RS-232 (V.28), RS-422A (V.11), RS-449, RS-485, V.35, and EIA-530. The SP502 is fabricated using low–power BiCMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. Drivers Receivers SP502 Charge Pump Driver Decode Receiver Decode Rev.
Published: |