SP3486 - +3.3V Low Power Quad RS-485/RS-422 Line Drivers

Sipex

Datasheet Details

Part number	SP3486
Manufacturer	Sipex
File Size	121.83 KB
Description	+3.3V Low Power Quad RS-485/RS-422 Line Drivers
Datasheet	SP3486_SipexCorporation.pdf

The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols.

a common driver enable control. The SP3487 provides independent driver enable controls for each pair of drivers. Both devices feature tri-state outputs and a -7V to +12V common-mode input voltage range. DI1 DO1A DO1B EN DO2B DO2A DI2 GND 1 SP3486 1 16 15 VCC DI4 DO4A DO4B EN DO3B DO3A DI3 DI1 DO1A DO1B EN1/EN2 DO2B DO2A DI2 GND 1 SP3487 1 16 15 VCC DI4 DO4A DO4B EN3/EN4 DO3B DO3A DI3 2 2 4 3 4 5 6 14 13 12 11 3 4 5 6 4 14 13 12 11 2 7 10 2 7 10 3 8 9 3 8 9 10/15/02 SP3486/348.

📁 SP3486 Similar Datasheet

SP3483 - 3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (MaxLinear)
SP3485 - 3.3V Low Power Half-Duplex RS-485 Transceiver (MaxLinear)
SP3485E - RS485/RS422 transceiver (UMW)
SP3400 - Diode Array (Littelfuse)
SP3401 - 18kV Diode Array (Littelfuse)
SP3406 - 600mA Buck Converter (SYNC POWER)
SP34063A - 1.5A Buck/Boost/Inverting DC-DC Regulator (Exar)
SP3420 - 6A Diode Array (Littelfuse)

Other Datasheets by Sipex

SP3481 - +3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate
SP3487 - +3.3V Low Power Quad RS-485/RS-422 Line Drivers
SP3488 - +3.3V Low Power Quad RS-485/RS-422 Line Receivers
SP3489 - +3.3V Low Power Quad RS-485/RS-422 Line Receivers
SP3490 - +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate
SP3491 - +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate

Published: Jun 7, 2005 |