Datasheet4U Logo Datasheet4U.com

SP3483 - +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

Description

The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols.

This device is pin-to-pin compatible with the Sipex SP483 device as well as popular industry standards.

Features

  • Sipex's BiCMOS process, allowing low power operation without sacrificing performance. The SP3483 is internally slew rate limited to reduce EMI and can meet the requirements of RS-485 and RS-422 up to 250kbps. RO 1 RE 2 DE 3 DI 4 R 8 Vcc 7 B 6 A D SP3483 5 GND SP3483 DS/04 SP3483 Low Power Slew Rate Limited Half-Duplex RS485 Transceivers © Copyright 2000 Sipex Corporation 1.

📥 Download Datasheet

Datasheet preview – SP3483

Datasheet Details

Part number SP3483
Manufacturer Sipex
File Size 156.43 KB
Description +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver
Datasheet download datasheet SP3483 Datasheet
Additional preview pages of the SP3483 datasheet.

📁 Similar Datasheet

  • SP3483 - 3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (MaxLinear)
  • SP3483 - +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (Exar)
  • SP3485 - 3.3V Low Power Half-Duplex RS-485 Transceiver (MaxLinear)
  • SP3485 - +3.3V Low Power Half-Duplex RS-485 Transceiver (Exar)
  • SP3485E - RS485/RS422 transceiver (UMW)
  • SP3400 - Diode Array (Littelfuse)
  • SP3401 - 18kV Diode Array (Littelfuse)
  • SP3406 - 600mA Buck Converter (SYNC POWER)
  • SP34063A - 1.5A Buck/Boost/Inverting DC-DC Regulator (Exar)
  • SP34063A - 1.5A Buck/Boost/Inverting DC-DC Switching Regulator (Sipex Corporation)
Other Datasheets by Sipex
  • SP3481 - +3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate
  • SP3486 - +3.3V Low Power Quad RS-485/RS-422 Line Drivers
  • SP3487 - +3.3V Low Power Quad RS-485/RS-422 Line Drivers
  • SP3488 - +3.3V Low Power Quad RS-485/RS-422 Line Receivers
  • SP3489 - +3.3V Low Power Quad RS-485/RS-422 Line Receivers
  • SP3490 - +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate
  • SP3491 - +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate
  • SP3493 - +3.3V Low Power RS-485/RS-422 Transceivers

Full PDF Text Transcription

Click to expand full text
® SP3483 +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver s s s s s s s s s s RS-485 and RS-422 Transceiver Operates from a single +3.3V supply Interoperable with +5.0V logic Driver/Receiver Enable Low Power Shutdown Mode -7V to +12V Common-Mode Input Voltage Range Allows up to 32 transceivers on the serial bus Compatibility with the industry standard 75176 pinout Driver Output Short-Circuit Protection Slew Rate Limited Driver for Low EMI (SP3483) DESCRIPTION The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Sipex SP483 device as well as popular industry standards.
Published: |