Datasheet4U Logo Datasheet4U.com

SP303 - Transceiver

Description

The SP303 is a single chip device that offers both RS-232 and AppleTalk™ interfaces.

When configured for RS-232 mode the SP303 has 4 drivers and 4 receivers.

type ports.

Features

  • The SP303 is a single chip device that offers both RS-232 and AppleTalk interfaces. When configured for RS-232 mode, the SP303 provides 4 drivers and 4 receivers. When the part is programmed for AppleTalk mode, the SP303 supports Macintosh.
  • type ports. The mode can be changed at any time by bringing both the SEL A and the SEL B pins high for Mac mode, or low for RS-232 mode. The RS-232 line driver circuits convert TTL.
  • logic level inputs into inverted RS-232 output signals. The R.

📥 Download Datasheet

Datasheet Details

Part number SP303
Manufacturer Sipex
File Size 65.11 KB
Description Transceiver
Datasheet download datasheet SP303 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Corporation SIGNAL PROCESSING EXCELLENCE SP303 RS232/AppleTalk™ Serial Transceiver s Single chip serial transceiver supports AppleTalkTM or RS-232 interface s Programmable Selection of Interface s 4 RS-232 Drivers and 4 RS-232 Receivers s Provides MacintoshTM type interface s ±30V Receiver Input Levels s Surface Mount Packaging DESCRIPTION… The SP303 is a single chip device that offers both RS-232 and AppleTalk™ interfaces. When configured for RS-232 mode the SP303 has 4 drivers and 4 receivers. When the part is programmed for AppleTalk mode, the SP303 supports Macintosh–type ports. All drivers and receivers can operate at data rates up to 1 Mbps. The differential driver used for transmitting data signals is equipped with a tri-state function.
Published: |