SST48CF096
Key Features
- pactFlash Association specification standard
- Small Form Factor: 36.4 mm x 42.8 mm x 3.3 mm
- Supports 5.0-Volt and 3.3-Volt Read and Write – 4.5-5.5V, 3.135-3.465V for mercial
- PC Card ATA and True IDE interface – 512 Bytes sector – ATA mand set compatible
- Low Power Consumption: – Active mode: 35 mA/55 mA (3.3V/5.0V)(typical) – Sleep mode: 100 µA/150 µA (3.3V/5.0V)(typical)
- Data Transfer Rate to/from Host – 20 MB/s burst at 5.0V – 6.6 MB/s burst at 3.3V
- High Performance – Up to 1.4 MB/sec sustained write transfer rate (host to flash)
- Controller Overhead mand to DRQ – Less than 0.5 ms
- Zero Data Retention Power – Batteries not required for data storage
- Start Up Time – Sleep to Read: 200 ns – Sleep to Write: 200 ns – Reset to Ready: 50 ms typical, 400 ms Max
