Datasheet4U Logo Datasheet4U.com

SiM3C166-B-GM - 32-bit MCU

Download the SiM3C166-B-GM datasheet PDF. This datasheet also covers the SIM3C1xx variant, as both devices belong to the same 32-bit mcu family and are provided as variant models within a single manufacturer datasheet.

Description

4 n 1.1.3.

1.2.

ig 2.

Features

  • e - 85 nA current mode with voltage supply monitor enabled N - Low-current RTC: 350 nA internal LFO, 620 nA external crystal - 12 μs wakeup (lowest power mode); 1.5 μs analog setting time r - 275 μA/MHz active current - Clocks can be gated off from unused peripherals to save power fo - Flexible clock divider: Reduce operational frequency up to 128x Clock Sources d - Internal oscillator with PLL: 23.
  • 80 MHz, reduced EMI mode - Low power internal oscillator: 20 MHz and 2.5 MHz modes e - Low.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SIM3C1xx_SiliconLaboratories.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SiM3C1xx High-Performance, Low-Power, 32-Bit Precision32™ MCU Family with up to 256 kB of Flash 32-bit ARM® Cortex™-M3 CPU Analog Peripherals - 80 MHz maximum frequency - 2 x 12-Bit Analog-to-Digital Converters: Up to 250 ksps 12-bit - Single-cycle multiplication, hardware division support mode or 1 Msps 10-bit mode, internal or external reference - Nested vectored interrupt control (NVIC) with 16 priority levels Memory - 32–256 kB Flash, in-system programmable - 8–32 kB SRAM (including 4 kB retention SRAM) - 16-channel DMA controller - External bus interface supports up to 16 MB of external mem- ory and a parallel LCD interface with QVGA resolution Power Management - Low drop-out (LDO) regulator - Power-on reset circuit and brownout detectors - 2 x 10-Bit Current-mode Digital-to-A
Published: |