Datasheet4U Logo Datasheet4U.com

Si569 - Crystal Oscillator

Description

VC = Voltage Control Pin Selectable via ordering option OE = Output enable; FS = Frequency Select GND = Ground CLK+ = Clock output CLK- = Complementary clock output.

Not used for CMOS.

Features

  • I2C programmable to any frequency from 0.2 to 3000 MHz with < 1 ppb resolution.
  • Ultra low jitter: 100 fs RMS Typ (12 kHz.
  • 20 MHz).
  • Configure up to 2 pin-selectable startup frequencies.
  • I2C interface supports 100 kbps, 400 kbps, and 1 Mbps (Fast Mode Plus).
  • Excellent PSRR and supply noise immunity:.
  • 80 dBc Typ.
  • Programmable Kv (ppm/V) simplifies development.
  • 3.3 V, 2.5 V and 1.8 V VDD supply operation from the same p.

📥 Download Datasheet

Full PDF Text Transcription

Click to expand full text
Ultra Series™ Crystal Oscillator (VCXO) Si569 Data Sheet Ultra Low Jitter I2C Programmable VCXO (100 fs), 0.2 to 3000 MHz The Si569 Ultra Series™ voltage-controlled crystal oscillator utilizes Silicon Laboratories’ advanced 4th generation DSPLL® technology to provide an ultra-low jitter, low phase noise clock at any output frequency. The device is user-programmed via simple I2C commands to provide any frequency from 0.2 to 3000 MHz with <1 ppb resolution and maintains exceptionally low jitter for both integer and fractional frequencies across its operating range. Onchip power supply filtering provides industry-leading power supply noise rejection, simplifying the task of generating low jitter clocks in noisy systems that use switched-mode power supplies.
Published: |