C8051F018 Datasheet | Silicon Labs

25 MIPS, 16 k B Flash, 10-Bit ADC, 64-Pin Mixed-Signal MCU Analog Peripherals 10-Bit ADC High-Speed 8051 µC Core - - ±1 LSB INL; no missing codes Programmable throughput up to 100 ksps 8 external inputs; programmable as single-ended or differential Data-dependent windowed interrupt generator Built-in temperature sensor (±3 °C) 16 programmable hysteresis values Configurable to generate interrupts or reset Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks Up to 25 MIPS throughput with 25 MHz system clock Expanded interrupt handler 1280 bytes data RAM 16 k B Flash; in system programmamble in 512-byte sectors (512 bytes are reserved) 32 port I/O; all are 5 V tolerant Hardware SMBus™ (I2C™ patible), SPI™, and UART serial ports available concurrently Programmable 16-bit counter/timer array with five capture/pare modules 4 general-purpose 16-bit counter/timers Dedicated watchdog timer; bidirectional reset Internal programmable oscillator: 2- 16 MHz External oscillator: Crystal, RC, C, or Clock Can switch between clock sources on-the-fly 64-pin TQFP (standard lead and lead-free packages) Lead-free package: C8051F018-GQ Standard package: C8051F018 Memory Two parators Internal Voltage Reference VDD Monitor/Brown-out Detector Digital Peripherals On-Chip JTAG Debug & Boundary Scan .. debug (no emulator required) - On-chip debug circuitry facilitates full speed, non-intrusive in-system Provides breakpoints, single stepping, watchpoints, stack monitor Inspect/modify memory and registers Superior performance to emulation systems using ICE-chips, target pods, and sockets IEEE1149.1 pliant boundary scan Typical operating current: 12.5 m A at 25 MHz Multiple power saving sleep and shutdown modes Clock Sources Supply Voltage: 2.8 to 3.6 V Temperature Range: - 40 to +85 °C Package Ordering Part Numbers VDD VDD VDD DGND DGND DGND A V+ A V+ A GND A GND TCK TMS TDI TDO RST Digital Power UART SMBus SPI Bus Analog Power 5-Chnl...