Datasheet4U Logo Datasheet4U.com

AN315 - ROBUST ELECTRICAL SURGE IMMUNITY

Description

Si3400 and Si3401 protection consists of a stack of ten, high-current 6.2 V Zener diodes.

These lower-voltage Zener diodes have a lower temperature and process variation than a higher voltage Zener clamp, such as an SMAJ58A.

📥 Download Datasheet

Datasheet preview – AN315

Datasheet Details

Part number AN315
Manufacturer Silicon Laboratories
File Size 208.51 KB
Description ROBUST ELECTRICAL SURGE IMMUNITY
Datasheet download datasheet AN315 Datasheet
Additional preview pages of the AN315 datasheet.

📁 Similar Datasheet

  • AN31 - CMOS Gate Array (AMI)
  • AN3100 - General Purpose Amplifier Biasing (Freescale Semiconductor)
  • AN3117S - RF modulator IC for VCR and VDP (Panasonic Semiconductor)
  • AN3117SA - RF modulator IC for VCR and VDP (Panasonic Semiconductor)
  • AN313 - Dual 3W Audio Power Amplifier (ETC)
  • AN314 - Multiplexing the CS556x/7x/8x Delta-Sigma ADCx (Cirrus Logic)
  • AN316 - VTR Drop-Out Compensation Circuit (Matsushita Electric)
  • AN30070A - 1.5A Step-Down or Inverting DC-DC Converter (Panasonic)
  • AN301 - High-Speed DMOS FET Analog Switches and Switch Arrays (TEMIC)
  • AN30180A - 1.2A Synchronous DC-DC Step Down Regulator (Panasonic)
Other Datasheets by Silicon Laboratories
  • AN31 - INDUCTOR DESIGN
  • AN311 - CP2120 PORTING GUIDE
  • AN313 - USING THE Si3400 AND Si3401 IN HIGH POWER APPLICATIONS

Full PDF Text Transcription

Click to expand full text
AN315 ROBUST ELECTRICAL SURGE IMMUNITY F O R P O E PD S T H R O U G H I N T E G R A T E D P R O T E C T I O N 1. Introduction The Si3400 and Si3401 Power over Ethernet (PoE) powered device (PD) controllers are designed in an efficient Silicon on Insulator (SOI) process technology, which enables the integration of a robust surge protection function. Competitive PoE PD devices require external transient voltage suppressors (TVS), such as an SMAJ58A, to provide surge protection. However, due to their inherently wider range of clamping voltage specifications, external TVS-based protectors typically necessitate the use of 100 V processes for the PD controller device. This note discusses some of the detailed considerations regarding the Si3400's proprietary surge protection circuitry that www.
Published: |