Datasheet4U Logo Datasheet4U.com

AN-SY6280 - Low Loss Power Distribution Switch

Description

The SY6280 develops ultra-low Rds(on) switch with programmable current limiting to protect the power source from over current and short circuit conditions.

It integrates the over temperature protection and discharges the output capacitor during the shutdown.

Features

  • Distribution voltages: 2.4V to 5.5V.
  • Programmable current limit.
  • Enable polarity: active high.
  • Over temperature shutdown and automatic retry.
  • Reverse blocking (no body diode).
  • At shutdown, OUT can be forced higher than IN.
  • Automatic outpu.

📥 Download Datasheet

Datasheet Details

Part number AN-SY6280
Manufacturer Silergy
File Size 291.67 KB
Description Low Loss Power Distribution Switch
Datasheet download datasheet AN-SY6280 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN-0001 Surface Mount Assembly ANADIGICS
AN-0002 Biasing Circuits and Considerations ANADIGICS
AN-0003 Thermal Considerations ANADIGICS
AN-0004 12mm Tape ANADIGICS
AN-1090 Controller Dynamics/Tuning International Rectifier

Other Datasheets by Silergy

Part Number Description
AN-SY7152 High Efficiency 1MHz 2A Step-Up Regulator
AN-SY8003 1MHz Synchronous Step Down Regulator
AN-SY8003A 1MHz Synchronous Step Down Regulator
AN-SY8063 3.5A Synchronous Step Down Regulator
AN-SY8105 Synchronous Step Down Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Application Note: AN_SY6280 Low Loss Power Distribution Switch TARGET DESIGN SPECIFICATION Preliminary Spec General Description The SY6280 develops ultra-low Rds(on) switch with programmable current limiting to protect the power source from over current and short circuit conditions. It integrates the over temperature protection and discharges the output capacitor during the shutdown. In case the output is pulled higher than the input voltage under the shutdown, the SY6280 can block the current flowing from the output to the input. Ordering Information SY6280□(□□)□ Temperature Code Package Code Optional Spec Code Temperature Range: -40°C to 85°C Ordering Number Package type SY6280AAC SOT23-5 Note ---- Features • Distribution voltages: 2.4V to 5.