900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Siemens Electronic Components Datasheet

PLCD5582 Datasheet

(PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display

No Preview Available !

RED PLCD5580
YELLOW PLCD5581
HIGH EFFICIENCY RED PLCD5582
GREEN PLCD5583
HIGH EFFICIENCY GREEN PLCD5584
Low Power 0.145” 8-Character, 5x5 Dot Matrix
Parallel Input Alphanumeric Intelligent Display
FEATURES
Eight 0.145” (3.68 mm) High 5 x 5 Dot Matrix Char-
acters in Red, Yellow, High Efficiency Red, Green,
or High Efficiency Green
Built-in 2 Page, 256 Character ROM. Both Pages
Mask Programmable for Custom Fonts
Built-in Decoders, Multiplexers and Drivers
Wide Viewing Angle, X Axis ±50°, Y Axis ±65°
Programmable Features:
– Individual Flashing Character
– Full Display Blinking
– Multi-Level Dimming and Blanking
– Clear Function
– Lamp Test
Internal or External Clock
End Stackable Dual-In-Line Plastic Package
Low Power: 20% Less Power Consumption Than
5 X 7 Format
Package Dimensions in inches (mm)
0.145
(3.68)
1.680 (42.67) max.
0.210
(5.34)
0.105
(2.67)
0.771
(19.58)
0.386
(9.8)
0.086
(2.19)
0.600
(15.24)
Pin 1 Indicator
Part Number
EIA Date
Code
PLCD558X
SIEMENS
WW
Z1
0.012 (0.30) typ.
Intensity Code
Color Bin
(For Yellow Only)
0.209 (5.31)
0.189
(4.79)
0.018 typ.
(.46)
0.100
(2.54) typ.
0.160±.020
(4.06±.50)
DESCRIPTION
The PLCD5580 (Red), PLCD5581 (Yellow), PLCD5582 (High Effi-
ciency Red), PLCD5583 (Green), and PLCD5584 (High Efficiency
Green) are eight digit, 5x5 dot matrix, alphanumeric Programma-
ble Displays. The 0.145 inch high digits are packaged in a rug-
ged, high quality, optically transparent, standard 0.6 inch 28 pin
plastic DIP.
The on-board CMOS has a built-in two page, 256 character ROM.
Both pages are mask programmable for 256 custom characters.
The first page of ROM of the standard product contains 128 char-
acters including ASCII, selected European and Scientific sym-
bols. The second page contains Katakana Japanese characters,
more European characters, Avionics, and other graphic symbols.
The PLCD558X is designed for standard microprocessor inter-
face techniques and is fully TTL compatible. The Clock I/O and
Clock Select pins allow the user to synchronize multiple display
modules.
2–131



Siemens Electronic Components Datasheet

PLCD5582 Datasheet

(PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display

No Preview Available !

Maximum Rating
DC Supply Voltage ........................................ –0.5 to +7.0 Vdc
Input Voltage Levels Relative
to Ground...............................................–0.5 to VCC+0.5 Vdc
Operating Temperature ................................. –40°C to +85°C
Storage Temperature .................................... –40°C to +100°C
Maximum Solder Temperature 0.063"
below Seating Plane, t<5 sec...................................... 260°C
Relative Humidity at 85°C................................................. 85%
Note: Maximum voltage is with no LEDs illuminated.
Enlarged Character Font
0.033
(0.84)
typ.
0.100
(2.54)
C0 C1 C2 C3 C4
R0
0.011
(0.28)
typ.
R1
R2
0.145
(3.68)
R3
R4
0.022
(0.56) typ.
Dimensions in inches (mm)
Tolerance: .XXX=± .010 (.25)
Switching Specifications
(over operating temperature range and VCC=4.5 V).
Symbol Description
Min.
Units
Tbw
Tacc(2)
Time Between Writes
Display Access Time
30
130
ns
ns
Tas Address Setup Time 10 ns
Tces
Chip Enable Hold Time 0
ns
Tah
Address Hold Time
20
ns
Tceh
Chip Enable Hold Time 0
ns
Tw Write Active Time 100 ns
Tds
Data Valid Prior to
50
Rising Edge of Write
ns
Tdh
Trc(1)
Tclr(3)
Data Hold Time
Reset Active Time
Clear Cycle Time
20
300
3
ns
ns
µs
1. Wait 300 ns min. after the reset function is turned off.
2. Tacc=Tas + Tw + Tah
3. The Clear Cycle Time may be shortened by writing a
second Control Word with the Clear Bit disabled, 160 ns
after the first control word that enabled the Clear Bit.
data
wait
data
Write Cycle Timing Diagram
Tacc
Tas
FL, A3-A0
Tah
write control wait 130 ns
word-clear bit
enabled
write control
word-clear bit
enabled
The Flash RAM and Character RAM may not be accessed
until the Clear Cycle is complete.
see Notes
CE
Tces
WR
D7-D0
Tceh
Tw Tbw
Tdh
Tds
see Notes
see Notes
see Notes
Notes
1. All input voltages are (VIL=0.8 V, VIH=2.0 V)
2. These wave forms are not edge triggered.
3. Tbw=Tas + Tah
2–132
PLCD5580/1/2/3/4


Part Number PLCD5582
Description (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Maker Siemens Semiconductor
PDF Download

PLCD5582 Datasheet PDF






Similar Datasheet

1 PLCD5580 (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Siemens Semiconductor
2 PLCD5581 (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Siemens Semiconductor
3 PLCD5582 (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Siemens Semiconductor
4 PLCD5583 (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Siemens Semiconductor
5 PLCD5584 (PLCD5580 - PLCD5584) 5x5 Dot Matrix Parallel Input Alphanumeric Intelligent Display
Siemens Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy