Datasheet4U Logo Datasheet4U.com

PC817 - Photocoupler

Description

PC817X Series contains an IRED optically coupled to a phototransistor.

It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option.

Input-output isolation voltage(rms) is 5.0kV.

) and CTR is 50% to 600% at input current

Features

  • 1. 4pin DIP package 2. Double transfer mold package (Ideal for Flow Solder- ing) 3. High collector-emitter voltage (VCEO:80V(.
  • )) 4. Current transfer ratio (CTR : MIN. 50% at IF=5 mA, VCE=5V) 5. Several CTR ranks available 6. High isolation voltage between input and output (Viso(rms) : 5.0 kV) (.
  • ) Up to Date code "P7" (July 2002) VCEO : 35V. From the production Date code "J5" (May 1997) to "P7" (July 2002), however the products were screened by BVCEO≥70V.
  • Agency approvals/Complianc.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PC817 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER GME
PC817 High Density Mounting Photocoupler Kexin
PC817 Phototransistor Optocouplers WUXI
PC817 PHOTOTRANSISTOR PHOTOCOUPLER HOTCHIP
PC817 photocoupler UMW

Other Datasheets by Sharp Corporation

Part Number Description
PC81710NIP0F Low Input Current Photocoupler
PC81710NIP1B Photocoupler
PC81710NSZ Photocoupler
PC81710NSZ0F Low Input Current Photocoupler
PC81710NSZ1B Photocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PC817X Series ∗4-channel package type is also available. (model No. PC847X Series) PC817X Series DIP 4pin General Purpose Photocoupler ■ Description PC817X Series contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA. ■ Features 1. 4pin DIP package 2. Double transfer mold package (Ideal for Flow Solder- ing) 3. High collector-emitter voltage (VCEO:80V(*)) 4. Current transfer ratio (CTR : MIN. 50% at IF=5 mA, VCE=5V) 5. Several CTR ranks available 6. High isolation voltage between input and output (Viso(rms) : 5.