PC410L0NIP0F Datasheet | Sharp Corporation

Description PC410L0NIP0F Series contains a LED optically coupled to an OPIC chip. It is packaged in a 5 pin mini-flat. Input-output isolation voltage(rms) is 3.75 k V. High speed response(TYP. 10 Mb/s) and CMR is MIN. 10 k V/µs. - Agency approvals/pliance 1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC410L) 2. Approved by VDE, DIN EN60747-5-2 (∗) (as an option), file No. 40009162 (as model No. PC410L) 3. Package resin : UL flammability grade (94V-0) (∗) DIN EN60747-5-2 : successor standard of DIN VDE0884 - Features 1. 5 pin Mini-flat package 2. Double transfer mold package (Ideal for Flow Soldering) 3. High noise immunity due to high instantaneous mon mode rejection voltage (CMH : MIN.10 k V/ µs, CML : MIN. - 10 k V/µs) 4. High speed response (t PHL : TYP. 48 ns, t PLH : TYP. 50 ns) 5. High isolation voltage between input and output (Viso(rms) : 3.75 k V) 6. Ro HS directive pliant - Applications 1. Programmable controllers 2. Inverter ∗ "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing circuit integrated onto a single chip. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. ..net Sheet No.: D2-A04802FEN Date Jun. 30. 2005 © SHARP Corporation PC410L0NIP0F Series - Internal Connection Diagram 1 6 5 1 3 4 5 6 4 Anode Cathode GND VO (Open collector) VCC Amp. - Outline Dimensions 1. Mini-flat Package [ex. PC410L0NIP0F] 3.6±0.3 1.27 ±0.25 6 5 4 (Unit : mm) 2. Mini-flat Package (VDE option) [ex. PC410L0YIP0F] 3.6±0.3 1.27 ±0.25 6 5 4 ±0.25 1.27±0.25 SHARP mark "S" Anode mark PC4 10L 4.4±0.2 SHARP mark "S" Anode...