Datasheet4U Logo Datasheet4U.com

SC4508A - Buck or Buck-Boost Current Mode Controller

Description

The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency.

It can be configured in either buck or buck boost (inverting) converters.

The converters can be operated from 2.7V to 15V input voltage range.

Features

  • ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ Wide input voltage range 2.7V to 15V Programmable output voltage Programmable switching frequency up to 1.5MHz Buck or buck boost (inverting) configuration Current mode control with slope compensation Very low quiescent current in shutdown mode Accessible reference voltage Hiccup mode after 32 cycle-by-cycle OCP 4mm x 4mm MLPQ-12 lead free package. This product is fully WEEE and RoHS compliant.

📥 Download Datasheet

Datasheet Details

Part number SC4508A
Manufacturer SEMTECH
File Size 465.39 KB
Description Buck or Buck-Boost Current Mode Controller
Datasheet download datasheet SC4508A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC451 Single Phase Power Supply Controller Semtech
SC451ITSTRT Single Phase Power Supply Controller Semtech
SC451XX LI-ION BATTERY PROTECTOR ETC
SC4541 High Frequency LED Driver Semtech
SC4000 Universal Timeslot Interchange NXP

Other Datasheets by SEMTECH

Part Number Description
SC4508 Buck or Buck-Boost Current Mode Controller
SC450 Dual Phase Power Supply Controller
SC4501 2MHz Step-Up Switching Regulator
SC4502 2MHz Step-Up Switching Regulator
SC4502H 2MHz Step-Up Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Buck or Buck-Boost (Inverting) Current Mode Controller POWER MANAGEMENT Description The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) converters. The converters can be operated from 2.7V to 15V input voltage range. The typical operating supply current is 3mA and a shutdown pin allows the user to turn the controller off reducing it to less than 200µA. The output voltage can adjusted by external resistor diwww.DataSheet4U.com vider. The switching frequency is programmable up to 1.5MHz, allowing small inductor and capacitor values to minimize PCB space. The operating current level is programmable via an external sense resistor.
Published: |