Datasheet4U Logo Datasheet4U.com

RClamp2451ZA - 24V ESD Protection

Description

RailClamp® TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS.

They are designed for use on high speed ports in applications such as cell phones, notebook computers, and other portable electronics.

Features

  • extremely good ESD protection characteristics including a low typical dynamic resistance of 0.16 Ohms (typical), low peak ESD clamping voltage, and high ESD withstand voltage (+/-14kV contact per IEC 61000-4-2). Low typical capacitance (0.35pF at VR=0V) means that RClamp2451ZA will not create harmonic distortion in the RF signal. This device is bidirectional and has a working voltage of 24V for use on NFC resonator circuits without signal clipping. RClamp2451ZA is in a 2-pin SLP0603P2X3F package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP2402B Ultra-Low Capacitance TVS Semtech Corporation
RCLAMP2504N 2.5V & 3.3V TVS Arrays Semtech Corporation
RCLAMP2504P (RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays Semtech Corporation
RCLAMP0502A Low Capacitance TVS Array Semtech Corporation
RCLAMP0502N Low Capacitance TVS Array Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
RClamp2431TQ 24V ESD Protection
RClamp2261ZA 22V EOS Protection
RClamp2574N High Power TVS
RClamp2574NQ High Power TVS
RClamp2594N 4-Line Surge and ESD Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp® Description RailClamp® TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high speed ports in applications such as cell phones, notebook computers, and other portable electronics. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. RClamp®2451ZA is specifically designed for protection of Near Field Communications (NFC) interfaces. It features extremely good ESD protection characteristics including a low typical dynamic resistance of 0.
Published: |