The P6KE series is designed speciﬁcally to protect sensi ve electronic equipment from voltage transients ind-
uced by lightning and other transient voltage events.
F E AT U R E S
> Plas c package.
> Glass passivated chip junc on in DO-15 Package
> 600W peak pulse power capability on 10/1000μs waveform.
> Excellent clamping capability.
> Low zener impedance.
> Fast response me: typically less than 1.0ps from 0 Volts to BV min.
> Typical IR less than 1μA above 12V.
> Case: JEDEC DO-15 Molded Plas c.
> Terminals: Axial leads, solderable per MIL-STD-750, Method 2026.
> Polarity: Color band denoted cathode except bidirec onal.
> Moun ng Posi on: Any.
Transient Voltage Suppressors
MAXIMUM RATINGS AND CHARAC TERISTICS Ra ngs at 25oC ambient temperature unless otherwise speciﬁed.
R AT I N G
Peak Pulse Power Dissipa on on 10/1000us waveform (Note1).
Peak Pulse Current of on 10/1000us waveform(Note1).
Steady State Power Dissipa on on Inﬁnite Heat Sink at TL=75 oC
Maximum Instantaneous Forward Voltage at 25A for Unidirec onal Only (Note 2)
Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated
Load, (JEDEC Method) (Note 3).
VA LU E
1. Non-repe ve current pulse, TA = 25℃.
2. VF<3.5V for devices of VBR _< 200V and VF<5.0V for devices of VBR _> 201V.
3. 8.3ms single half sine-wave, or equivalent square wave for Unidirec onal Only, Duty cycle=4 pulses per minutes maximum.
Opera ng Junc on Temperature
Storage Temperature Range
Junc on to Ambient on printed circuit
-55 to +125
-55 to +150