Datasheet4U Logo Datasheet4U.com

S-24C01C - 2-WIRE SERIAL E2PROM

Description

Slave address input Slave address input Slave address input 4 GND Ground 5 SDA 1 Serial data I/O 6 SCL 1 Serial clock input Write protect input 7 WP Connected to VCC: Protection valid Open or connected to GND: Protection invalid 8 VCC Power supply

1.

Features

  • Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.5 V.
  • Page write: 16 bytes / page.
  • Sequential read.
  • Operation frequency:.
  • Write time: 400 kHz (VCC = 1.6 V to 5.5 V) 5.0 ms max.
  • Noise suppression: Schmitt trigger and noise filter on input pins (SCL, SDA).
  • Write protect function during the low power supply voltage.
  • Endurance: 106cycles / word.
  • 1 (Ta = +25°C).
  • Data retention: 100 years.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S-24C02D 2-WIRE SERIAL E2PROM ABLIC
S-24C04D 2-WIRE SERIAL E2PROM ABLIC
S-24C08C 2-WIRE SERIAL E2PROM ABLIC
S-24C08C 2-WIRE SERIAL E2PROM Seiko Instruments
S-24C08CxxH 2-WIRE SERIAL E2PROM ABLIC

Other Datasheets by Seiko Instruments

Part Number Description
S-24C01A CMOS 2-WIRE SERIAL EEPROM
S-24C01B 2-WIRE CMOS SERIAL E2PROM
S-24C02A CMOS 2-WIRE SERIAL EEPROM
S-24C02B 2-WIRE CMOS SERIAL E2PROM
S-24C02C 2-WIRE SERIAL E2PROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NOT RECOMMENDED FOR NEW DESIGN S-24C01C/02C www.sii-ic.com © Seiko Instruments Inc., 2008-2011 2-WIRE SERIAL E2PROM Rev.4.0_00_C The S-24C01C/02C is a 2-wire, low current consumption and wide range operation serial E2PROM. The S-24C01C/02C has the capacity of 1 K-bit and 2 K-bit, and the organization is 128 words × 8-bit, 256 words × 8-bit, respectively. Page write and sequential read are available. „ Features • Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.5 V • Page write: 16 bytes / page • Sequential read • Operation frequency: • Write time: 400 kHz (VCC = 1.6 V to 5.5 V) 5.0 ms max.
Published: |