Datasheet4U Logo Datasheet4U.com

LV8713T - PWM Constant-Current Control Stepping Motor Driver

Features

  • Single-channel PWM constant-current control stepping motor driver incorporated.
  • Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase.
  • Microstep can control easily by the CLK-IN input.
  • Power-supply voltage of motor : VM max = 18V.
  • Output current : IO max = 0.8A.
  • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ).
  • A thermal shutdown circuit and a low voltage detecting circuit are bu.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV8713T PWM Constant-Current Control Stepping Motor Driver ON Semiconductor
LV8711T PWM Constant-Current Control Stepping Motor Driver ON Semiconductor
LV8712T PWM Constant-Current Control Stepping Motor Driver ON Semiconductor
LV8714TA Dual Stepper Motor Driver ON Semiconductor
LV8702V PWM Current Control High-efficient Stepper Motor Driver ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LV8711T PWM Constant-Current Control Stepping Motor Driver
LV8712T PWM Constant-Current Control Stepping Motor Driver
LV8727 PWM Current Control Stepping Motor Driver
LV8731V PWM Current Control Stepping Motor Driver
LV8732V PWM Current Control Stepping Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1918 LV8713T Overview Bi-CMOS LSI PWM Constant-Current Control Stepping Motor Driver The LV8713T is a stepping motor driver of the micro-step drive corresponding to supports 8W 1-2 phase excitation. It is the best for the drive of the stepping motor for a scanner and a small printer. Features • Single-channel PWM constant-current control stepping motor driver incorporated. • Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase • Microstep can control easily by the CLK-IN input. • Power-supply voltage of motor : VM max = 18V • Output current : IO max = 0.8A • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ) • A thermal shutdown circuit and a low voltage detecting circuit are built into.