LV8081GQ Datasheet | SANYO

Overview Two channels Constant-current H-bridge Driver The LV8081GQ is a two-channel constant-current driver that supports low-voltage operation. It is optimal for constant-current drive of stepping motors (AF and zoom) in portable equipment such as camera cell phones. Features - Two channels constant-current H-bridge driver - Built-in position detection parator, SW for the photo reflector (independent control) - Supports both 2 phase excitation drive and 1-2 phase excitation drive. - Implemented in a low-power MOS IC process. - Ultraminiature easy to solder UCT16 package (2.6 × 2.6 × 0.6mm) - Built-in thermal shutdown circuit and Low voltage shutdown circuit. - 1.8V input interface with battery supply. - OUT1-3 short , OUT2-4 short and REG1-2 is short-circuited, and it is possible to correspond as 1ch driver. Specifications Absolute Maximum Ratings at Ta = -30 to 85°C(It bees a design certification excluding 25℃.) Parameter Maximum supply voltage Output voltage Input voltage Ground pin source current Allowable power dissipation Operating temperature Storage temperature Symbol VCC, VM max VOUT max VIN max IGND Pd max Topr Tstg OUT1, OUT2, OUT3, OUT4 CONT, IN Per channel Mounted on a circuit board.- Conditions Ratings 6.5 6.5 -0.3 to +6.5 400 700 -30 to +85 -40 to +150 Unit V V V m A m W °C °C - Specified circuit board : 40×50×0.8mm3 : 4-layer (2S2P) glass epoxy printed circuit board Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, munication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high...