Datasheet4U Logo Datasheet4U.com

LC717A10AJ - Capacitance-Digital-Converter LSI

Features

  • Detection system: Differential capacitance detection (Mutual capacitance type).
  • Input capacitance resolution: Can detect capacitance changes in the femto Farad order.
  • Measurement interval (16 differential inputs): 30ms (Typ) (at initial configuration), 6ms (Typ) (at minimum interval configuration).
  • External components for measurement: Not required.
  • Interface: I2C.
  • compatible bus or SPI selectable.
  • Current consumption: 570μA (Typ) (VDD.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC717A10AJ Capacitance-Digital-Converter LSI ON Semiconductor
LC717A10AR Capacitance-Digital-Converter LSI ON Semiconductor
LC717A10PJ Capacitance-Digital-Converter LSI ON Semiconductor
LC717A00AJ Capacitance-Digital-Converter LSI ON Semiconductor
LC717A00AR Capacitance-Digital-Converter LSI ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC717A10AR Capacitance-Digital-Converter LSI
LC717A00AJ Capacitance-Digital-Converter LSI
LC717A00AR Capacitance-Digital-Converter LSI
LC7120 CMOS LSI 27MHz CB TRANSCEIVER PLL FREQUENCY SYNTHESIZER
LC7131 CMOS LSI PLL FREQUENCY SYNTHSIZER LSI

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENA2162 CMOS LSI LC717A10AJ Overview Capacitance-Digital-Converter LSI for Electrostatic Capacitive Touch Sensors The LC717A10AJ is a high-performance and low-cost capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 16 channels capacitance-sensor input. This makes it ideal for use in the products that need many switches. Since the calibration function and the judgment of ON/OFF are automatically performed in LSI internal, it can make development time more short. A detection result (ON/OFF) for each input can be read out by the serial interface (I2C compatible bus or SPI). Also, measurement value of each input can be read out as 8-bit digital data.
Published: |