Datasheet4U Logo Datasheet4U.com

C4113 - 2SC4113

Description

The ADP7105 is a CMOS, low dropout (LDO)linear regulator that operates from 3.3 V to 20 V and provides up to 500 mA of output current.

This high input voltage LDO is ideal for regulation of high performance analog and mixed-signal circuits operating from 1.22 V to 19 V rails.

Features

  • 20 V, 500 mA, Low Noise LDO Regulator with Soft Start ADP7105.

📥 Download Datasheet

Datasheet preview – C4113

📁 Similar Datasheet

  • C4111 - Power Transistors (Panasonic Semiconductor)
  • C4112 - Transistor (ETC)
  • C4115 - 2SC4115 (Jiangsu)
  • C4115E - 2SC4115E (Jiangsu Changjiang Electronics)
  • C4115S - 2SC4115S (Jiangsu Changjiang Electronics)
  • C4116 - 2SC4116 (Toshiba)
  • C4117 - 2SC4117 (Toshiba)
  • C4118 - 2SC4118 (Toshiba)
  • C4106 - NPN Triple Diffused Planar Silicon Transistor (Sanyo Semicon Device)
  • C4108 - 2SC4108 (Sanyo Semiconductor)
Other Datasheets by Sanyo

Full PDF Text Transcription

Click to expand full text
Data Sheet FEATURES 20 V, 500 mA, Low Noise LDO Regulator with Soft Start ADP7105 TYPICAL APPLICATION CIRCUITS VIN = 8V CIN + 1µF VIN VOUT SENSE ON OFF 100k Ω 100k Ω + COUT 1µF VOUT = 5V Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 µV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature: −2% to +1% Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 µA at VIN = 12 V, stable with small 1 µF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.
Published: |