Datasheet4U Logo Datasheet4U.com

SPF7301 - Full Bridge DC Motor Driver

Key Features

  • A DMOS of low ON resistance (0.1Ω typ) is mounted on the high and low side power elements.
  • Two input signals control the forward/reverse/brake of a DC motor.
  • Current limit and overcurrent protection circuits.
  • Low voltage and thermal protection, excess input detecting output and input terminal open protection External Dimensions (unit: mm) 14.74±0.2 13.04±0.2 20 11 1.0 +0.1.
  • 0.05 Fin thickness a 2±0.2 7.5±0.2 Absolute Maximum Ratings (Ta = 25ºC) Parameter.

📥 Download Datasheet

Datasheet Details

Part number SPF7301
Manufacturer Sanken
File Size 32.97 KB
Description Full Bridge DC Motor Driver
Datasheet download datasheet SPF7301 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SPF7302 Full Bridge DC Motor Driver Allegro MicroSystems
SPF GENERAL-PURPOSE FAILSAFE MOLDED WIREWOUND RESISTOR WIREWOUND AND FILM TECHNOLOGIES
SPF-125 Self Priming Pump NISHIGAKI
SPF-2000 Low Noise High Linearity pHEMT GaAs FET Sirenza Microdevices
SPF-2086T Low Noise pHEMT GaAs FET Sirenza Microdevices

Other Datasheets by Sanken

Part Number Description
SPF7211 2-ph Stepper-motor Driver
SPF0004 Dual N-channel Power MOSFET
SPF3004 Dropper Type System Regulator
SPF3006 System Regulator
SPF3009 Surface mount type Dual output system series regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Full Bridge DC Motor Driver ICs SPF7301(under development) 10.5±0.3 Features ● A DMOS of low ON resistance (0.1Ω typ) is mounted on the high and low side power elements ● Two input signals control the forward/reverse/brake of a DC motor ● Current limit and overcurrent protection circuits ● Low voltage and thermal protection, excess input detecting output and input terminal open protection External Dimensions (unit: mm) 14.74±0.2 13.04±0.2 20 11 1.0 +0.1 – 0.05 Fin thickness a 2±0.2 7.5±0.