Datasheet4U Logo Datasheet4U.com

SIM6800M - High Voltage 3-Phase Motor Driver

Description

integrated.

Features

  • Built-in Bootstrap Diodes with Current Limiting Resistors (60 Ω).
  • CMOS-compatible Input (3.3 V or 5 V).
  • Pb-free (RoHS Compliant).
  • Isolation Voltage: 1500 V (for 1 min) 21 20 1 igns Leadform 2971 Des Not to scale UL-recognized Component (File No. : E118037) (SIM6880M UL Recognition Pending) w.
  • Fault Signal Output at Protection Activation (FO Pin) e.
  • High-side Shutdown Signal Input (SD Pin) N.
  • Protections Include: Overcurrent Limit (OCL): Auto-restart r Overc.

📥 Download Datasheet

Datasheet Details

Part number SIM6800M
Manufacturer Sanken
File Size 1.54 MB
Description High Voltage 3-Phase Motor Driver
Datasheet download datasheet SIM6800M Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SIM-012ST High power chip sensor Rohm
SIM-030ST Surface Mount High Output Infrared LEDs Rohm
SIM-080CYU LED DOT MATRIX MODULE AUK corp
SIM-096CAH LED DOT MATRIX MODULE AUK corp
SIM-096CAN LED DOT MATRIX MODULE AUK corp

Other Datasheets by Sanken

Part Number Description
SIM6811M High Voltage 3-Phase Motor Driver
SIM6812M High Voltage 3-Phase Motor Driver
SIM6813M High Voltage 3-Phase Motor Driver
SIM6822M High Voltage 3-Phase Motor Driver
SIM6822MV High Voltage 3-Phase Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
500 V / 600 V High Voltage 3-phase Motor Drivers SIM6800M/MV Series Data Sheet Description Package The SIM6800M/MV series are high voltage 3-phase DIP40 motor drivers in which transistors, a pre-drive circuit, and Mold Dimensions: 36.0 mm × 14.8 mm × 4.0 mm bootstrap circuits (diodes and resistors) are highly integrated. 40 These products can run on a 3-shunt current detection system and optimally control the inverter systems of low- to medium-capacity motors that require universal input standards. Features ● Built-in Bootstrap Diodes with Current Limiting Resistors (60 Ω) ● CMOS-compatible Input (3.3 V or 5 V) ● Pb-free (RoHS Compliant) ● Isolation Voltage: 1500 V (for 1 min) 21 20 1 igns Leadform 2971 Des Not to scale UL-recognized Component (File No.
Published: |