Datasheet4U Logo Datasheet4U.com

S6A0065 - 40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD

Description

Pin (No.) VDD(24) GND(34) VEE(31) V1, V2 (44,45) SC1 - SC20 V3, V4 (46, 47) SHL1(41) I O I I Part 1 Power Negative Supply Voltage Bias Voltage LCD driver Bias Voltage Data interface I/O Name Operating Voltage Description For logical circuit (2.7 - 5.5V) 0V (GND) For LCD driver circuit Bias voltage l

Features

  • Display driving bias: static - 1/5 Power supply voltage: 2.7- 5.5V Supply voltage for display: 3.0 - 13.0V (VLCD = VDD - VEE) Interface Driver (cascade connection) Other S6A0065, S6A2067 Controller S6A0069 S6A0070 S6A0073.
  • CMOS Process 64QFP or bare chip available 1 S6A0065 40 CH.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S6A 6 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S6A13 Thyristor Silicon Planar Type Toshiba
S6AE101A Energy Harvesting PMIC Cypress Semiconductor

Other Datasheets by Samsung Semiconductor

Part Number Description
S6A0069 40CH SEGMENT/COMMON DRIVER
S6A0031 8 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
S6A0032 16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
S6A0035 53 SEGMENT STATIC DRIVER
S6A0070 80 SEG / 16 COM DRIVER & CONTROLLER FOR DOT MATRIX LCD

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD S6A0065 INTRODUCTION The S6A0065 is a LCD driver IC which is fabricated by low power CMOS technology. Basically this IC consists of 20 x 2 bit bi-directional shift register, 20 x 2 bit data latch and 20 x 2 bit driver. (refer to Fig 1) This IC can be used as common or segment driver. FUNCTION • • • Dot matrix LCD driver with 40 channel output. Selects function to use common/segment drivers simultaneously. Input / Output signal - Output: 20 x 2 channel waveform for LCD driving - Input: Serial display data and control signal from the controller LSI. Bias voltage (V1-V6) FEATURES • • • • Display driving bias: static - 1/5 Power supply voltage: 2.7- 5.5V Supply voltage for display: 3.0 - 13.
Published: |