Datasheet4U Logo Datasheet4U.com

CL10B224 - Multilayer Ceramic Capacitor

Description

of the Code Standard thickness (please refer to standard thickness table on next page) Thinner than standard thickness Thicker than standard thickness Standard Thickness High Q ( Low ` D.F ` ) Sn-100% (High-Q) Sn-100% (General) ※ Please Consult us for other terminatio

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CL10B102KB8NNNC Multi-layer Ceramic Capacitor Samsung semiconductor
CL10B104KB8NNNC Multi Layer Ceramic Capacitor Samsung semiconductor
CL100 NPN Silicon Planar Transistors CDIL
CL100505 SMD Multilayer Ferrite Chip Inductors Chilisin Electronics
CL100505T SMD Multilayer Ferrite Chip Inductors Chilisin Electronics

Other Datasheets by Samsung Semiconductor

Part Number Description
CL10B104KA8NNNC Multilayer Ceramic Capacitor
CL10A106MA8NRNC Multi-layer Ceramic Capacitor
CL10A225KO8NNNC Multi-layer Ceramic Capacitor
CL10Y105MR5NJN Array Type Capacitors
CL10Y225MR5NJN Array Type Capacitors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Multilayer Ceramic Capacitor Multilayer Ceramic Capacitor ■ INTRODUCTION MLCC(Multilayer Ceramic Capacitor) is SMD(Surface Mounted Device) type capacitor that is used in wide ranges of capacitance. MLCC is paid more attentions than other capacitors due to the better frequency characteristics, higher reliability, higher withstanding voltage and so on. MLCC is made of many layers of ceramic and inner electrodes like sandwich. Pd was used for inner electrodes. But the price of Pd was skyrocketed and Pd was replaced by the BME(Base Metal Electrode), which reduced the total cost of MLCC. This inner electrode is connected to outer termination for surface mounting, which is composed of three layers, Cu or Ag layer, Ni plating layer, and SnPb or Sn plating layer.
Published: |