VND5E050K-E Datasheet | STMicroelectronics

Features Max supply voltage Operating voltage range Max On-State resistance (per ch.) Current limitation (typ) Off state supply current (1) Typical value with all loads connected. - VCC VCC RON ILIMH IS 41V 4.5 to 28V 50 mΩ 27 A 2 µA(1) Power SSO-12 Power SSO-24 General - Inrush current active management by power limitation - Very low stand-by current - 3.0V CMOS patible inputs - Optimized electromagnetic emissions - Very low electromagnetic susceptibility - In pliance with the 2002/95/EC european directive Application - All types of resistive, inductive and capacitive loads Description The VND5E050J-E and VND5E050K-E are double channel high-side drivers manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny Power SSO-12 and Power SSO-24 packages. The VND5E050J-E and VND5E050K-E are designed to drive automotive grounded loads delivering protection, diagnostics and easy 3V and 5V CMOS-patible interface with any microcontroller. The devices integrate advanced protective functions such as load current limitation, inrush and overload active management by power limitation, over-temperature shut-off with auto-restart and over-voltage active clamp. A dedicated active low digital status pin is associated with every output channel in order to provide Enhanced diagnostic functions including fast detection of overload and short-circuit to ground, over-temperature indication, short-circuit to VCC diagnosis and ON & OFF state open-load detection. The diagnostic feedback of the whole device can be disabled by pulling the STAT_DIS pin up, thus allowing wired-ORing with other similar devices. Diagnostic functions - Open Drain status output - On-state open load detection - Off-state open load detection - Output short to Vcc detection .. - Overload and short to ground (power limitation) indication - Thermal shutdown indication - - Protections - Undervoltage shutdown - Overvoltage clamp - Load current limitation - Self limiting of fast thermal...