Datasheet4U Logo Datasheet4U.com

VIPER06 - Energy saving high voltage converter

Description

The VIPER06 is an offline converter with an 800 V avalanche rugged power section, a PWM controller, a user-defined overcurrent limit, open-loop failure protection, hysteretic thermal protection, soft startup and safe auto-restart after any fault condition.

Features

  • 800 V avalanche rugged power section.
  • PWM operation with frequency jittering for low EMI.
  • Operating frequency:  30 kHz for VIPER06Xx  60 kHz for VIPER06Lx  115 kHz for VIPER06Hx.
  • No need for an auxiliary winding in low-power.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VIPER100-E Fixed frequency off-line converter ST Microelectronics
VIPER12ADIP-E Low Power OFF-Line SMPS Primary Switcher ST Microelectronics
VIPER12AS-E Low Power OFF-Line SMPS Primary Switcher ST Microelectronics
VIPER15 Off-line high voltage converters ST Microelectronics
VIPER20A-E SMPS primary IC ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
VIPER01 Energy saving off-line high voltage converter
VIPer0P Zero-power off-line high voltage converter
VIPER100 SMPS PRIMARY I.C.
VIPer100A SMPS PRIMARY I.C.
VIPer100A-E Fixed frequency off-line converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
VIPER06 Energy saving high voltage converter for direct feedback Datasheet - production data Figure 1: Typical application Applications  Replacement of capacitive power supplies  Home appliances  Power metering  LED drivers Description The VIPER06 is an offline converter with an 800 V avalanche rugged power section, a PWM controller, a user-defined overcurrent limit, open-loop failure protection, hysteretic thermal protection, soft startup and safe auto-restart after any fault condition. The device is able to power itself directly from the rectified mains, eliminating the need for an auxiliary bias winding. Advanced frequency jittering reduces EMI filter cost.
Published: |