Datasheet4U Logo Datasheet4U.com

TS4994FC - 1.2W differential input/output audio power amplifier

General Description

The TS4994 is an audio power amplifier capable of delivering 1W of continuous RMS output power into an 8Ω load @ 5V.

Key Features

  • Differential inputs.
  • Near-zero pop & click.
  • 100dB PSRR @ 217Hz with grounded inputs.
  • Operating range from VCC = 2.5V to 5.5V.
  • 1.2W rail-to-rail output power @ VCC = 5V, THD = 1%, F = 1kHz, with 8Ω load.
  • 90dB CMRR @ 217Hz.
  • Ultra-low consumption in standby mode (10nA).
  • Selectable standby mode (active low or active high).
  • Ultra fast startup time: 15ms typ.
  • Available in 9-bump flip-chip (300mm bump diameter).
  • Lead-free package TS4994EIJT - Fl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS4956 Stereo audio amplifier system ST Microelectronics
TS4004 Low-noise charge pump DC converter ETC
TS4054 500mA single-cell lithium battery charger Synmosaic
TS408 Classic temperature sensor TIANSOR
TS40P05G Glass Passivated Bridge Rectifiers Taiwan Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
TS4994 1W Differential Input/Output Audio Power Amplifier
TS4990 1.2 W audio power amplifier
TS4995 1.2 W fully differential audio power amplifier
TS4997 2 x 1W differential input stereo audio amplifier
TS4998 2 x 1W differential input stereo audio amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS4994FC 1.2 W differential input/output audio power amplifier with selectable standby Features ■ Differential inputs ■ Near-zero pop & click ■ 100dB PSRR @ 217Hz with grounded inputs ■ Operating range from VCC = 2.5V to 5.5V ■ 1.2W rail-to-rail output power @ VCC = 5V, THD = 1%, F = 1kHz, with 8Ω load ■ 90dB CMRR @ 217Hz ■ Ultra-low consumption in standby mode (10nA) ■ Selectable standby mode (active low or active high) ■ Ultra fast startup time: 15ms typ. ■ Available in 9-bump flip-chip (300mm bump diameter) ■ Lead-free package TS4994EIJT - Flip-chip (9 bumps) Gnd VO- 7 6 5 VO+ Bypass 8 9 4 Stdby VIN+ 1 2 3 VINVCC Stdby Mode The device is equipped with common mode feedback circuitry allowing outputs to be always biased at VCC/2 regardless of the input common mode voltage.