Datasheet4U Logo Datasheet4U.com

STSPIN32F0B - Advanced single shunt BLDC controller

Description

The STSPIN32F0B is a System-In-Package providing an integrated solution suitable for driving three-phase brushless motors using different driving modes.

It embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and source).

Features

  • Extended operating voltage from 6.7 to 45 V.
  • Three-phase gate drivers.
  • 600 mA sink/source.
  • Integrated bootstrap diodes.
  • Cross-conduction prevention.
  • 32-bit ARM® Cortex®-M0 core:.
  • Up to 48 MHz clock frequency.
  • 4-kByte SRAM with HW parity.
  • 32-kByte Flash memory with option bytes used for write/readout protection.
  • Bootloader FW available.
  • 3.3. V DC/DC buck converter regulator with overcurrent, short-.

📥 Download Datasheet

📁 Similar Datasheet

  • STS-2308-01 - DYNAMIC MICRO SPEAKER (STAR ACOUSTICS)
  • STS-8857 - Transmissive Switch Assembly (Silonex)
  • STS01DTP06 - Dual NPN-PNP complementary Bipolar transistor (ST Microelectronics)
  • STS05DTP03 - Dual NPN-PNP complementary bipolar transistor (ST Microelectronics)
  • STS100 - Multifunction Telecommunications Switch (Solid State Optronic)
  • STS10100S - TRENCH SCHOTTKY BARRIER DIODE (JILIN SINO)
  • STS10DN3LH5 - Power MOSFETs (ST Microelectronics)
  • STS10NF30L - N-CHANNEL PowerMESH MOSFET (ST Microelectronics)
  • STS10T06 - Low Vf Schottky Diode (STANSON)
  • STS11NF30L - N-CHANNEL PowerMESH MOSFET (ST Microelectronics)
Other Datasheets by STMicroelectronics

Full PDF Text Transcription

Click to expand full text
STSPIN32F0B Datasheet Advanced single shunt BLDC controller with embedded STM32 MCU Product status link STSPIN32F0B Product summary Order Codes STSPIN32F0B Tray STSPIN32F0BTR Tape and Reel Marking STSPIN32F0B Package VFQFPN48 7x7x1mm Features • Extended operating voltage from 6.7 to 45 V • Three-phase gate drivers – 600 mA sink/source – Integrated bootstrap diodes – Cross-conduction prevention • 32-bit ARM® Cortex®-M0 core: – Up to 48 MHz clock frequency – 4-kByte SRAM with HW parity – 32-kByte Flash memory with option bytes used for write/readout protection – Bootloader FW available • 3.3.
Published: |