STOTG04E
Feature summary
- -
- Meets USB specification Rev. 2.0 And on-thego supplement to the USB 2.0 specification Analog car kit-patible Four operating modes: USB, I2C, UART and Audio Configurable using I2C serial interface Capable of 12Mbit/s full-speed and 1.5Mbit/s low-speed modes of operation Standard digital interface pliant with the OTG transceiver specification Supports the session request protocol (SRP) and host negotiation protocol (HNP) 35m A typical VBUS charge pump output current for 3.3V supply voltage Ability to control external charge pump for higher VBUS currents Integrated pull-up/-down resistors ±6k V ESD Protection on all USB pins (contact discharge) +1.6V to +3.6V Digital power supply and +2.7V to +5.5V analog supply voltage range Power-down mode with very low power consumption for battery powered devices
QFN24 (4mmx4mm)
- -
- -
- -
- -
- -
Description
The STOTG04 is a USB On-The-Go full-speed transceiver. It provides plete physical layer (PHY) solution for any USB-OTG...
