STM32WBA54KE Datasheet | STMicroelectronics

Features - Includes ST state-of-the-art patented technology - Ultra-low power radio - 2.4 GHz radio - RF transceiver supporting Bluetooth® Low Energy specification 5.4, IEEE 802.15.4-2015 PHY and MAC, supporting Thread, Matter and Zigbee® - Proprietary protocols - RX sensitivity: -96 d Bm (Bluetooth® Low Energy at 1 Mbps), -97.5 d Bm (IEEE 802.15.4 at 250 kbps) - Programmable output power, +10 d Bm with 1 d B steps - Support for external PA - Isochronous channel (Auracast/Unicast), AOA/AOD, long range - Packet traffic arbitration - Integrated balun to reduce BOM - Single crystal operation - Suitable for systems requiring pliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66 - Operating conditions: - 1.71 to 3.6 V power supply - - 40 °C to 85/105 °C temperature range - Ultra-low power platform with Flex Power Control - Autonomous peripherals with DMA, functional down to Stop 1 mode - 160 n A Standby mode (16 wake-up pins) - 0.9 µA Standby mode with 64 KB SRAM - 6.5 µA Stop mode with 64 KB SRAM - 23 µA/MHz Run mode at 3.3 V - Radio: Rx 4.4 m A / Tx at 0 d Bm 5.2 m A UFQFPN32 (5 x 5 mm) UFQFPN48 (7 x 7 mm) UFBGA59 (5 x 5 mm) - Embedded regulator LDO and SMPS step-down converter supporting switch on-the-fly and voltage scaling - Core: Arm® 32-bit Cortex®-M33 CPU with Trust Zone®, MPU, DSP, and FPU running at up to 100 MHz - ART Accelerator: 8-Kbyte instruction cache allowing 0-wait-state execution from flash memory (frequency up to 100 MHz, 150 DMIPS) - Benchmarks - 1.5 DMIPS/MHz (Drystone 2.1) - 410 Core Mark® (4.10 Core Mark/MHz) - Real time clock (RTC) with hardware calendar, alarms, and calibration - Clock sources - 32 MHz crystal oscillator - 32 k Hz crystal oscillator (LSE) - Internal low-power 32 k Hz (±5%) RC - Internal low frequency 32 k Hz RC (500 ppm/ °C) - Internal 16 MHz factory trimmed RC (±1%) - PLL for system clock, audio and...