STM32F302RC
STM32F302RC is ARM Cortex-M4F 32b MCU+FPU manufactured by STMicroelectronics.
- Part of the STM32F302xB comparator family.
- Part of the STM32F302xB comparator family.
STM32F302x B STM32F302x C STM32F303x B STM32F303x C
ARM Cortex-M4F 32b MCU+FPU, up to 256KB Flash+48KB SRAM 4 ADCs, 2 DAC ch., 7 p, 4 PGA, timers, 2.0-3.6 V operation
- production data
Features
- -
- -
- -
- -
- -
- -
- Core: ARM® 32-bit Cortex™-M4F CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floating-point unit) and MPU (memory protection unit). Operating conditions:
- VDD, VDDA voltage range: 2.0 V to 3.6 V Memories
- 128 to 256 Kbytes of Flash memory
- Up to 40 Kbytes of SRAM on data bus with HW parity check
- 8 Kbytes of SRAM on instruction bus with HW parity check (CCM) CRC calculation unit Reset and supply management
- Power-on/Power down reset (POR/PDR)
- Programmable voltage detector (PVD)
- Low power modes: Sleep, Stop and Standby
- VBAT supply for RTC and backup registers Clock management
- 4 to 32 MHz crystal oscillator
- 32 k Hz oscillator for RTC with calibration
- Internal 8 MHz RC with x 16 PLL option
- Internal 40 k Hz oscillator Up to 87 fast I/Os
- All mappable on external interrupt vectors
- Several 5 V-tolerant 12-channel DMA controller Up to four ADC 0.20 µS (up to 39 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2 to 3.6 V Up to two 12-bit DAC channels with analog supply from 2.4 to 3.6 V Seven fast rail-to-rail analog parators with analog supply from 2 to 3.6 V Up to four operational amplifiers that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
LQFP48 (7 × 7 mm) LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm)
- -
- -
- Up to 13 timers
- One 32-bit timer and two 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder...
