STIPNS2M50T-H
STIPNS2M50T-H is MOSFET manufactured by STMicroelectronics.
Features
- IPM 2 A, 500 V, RDS(on) = 1.7 Ω, 3-phase MOSFET inverter bridge including control ICs for gate driving
- Optimized for low electromagnetic interference
- 3.3 V, 5 V, 15 V CMOS/TTL input parators with hysteresis and pull-down/ pull-up resistors
- Undervoltage lockout
- Internal bootstrap diode
- Interlocking function
- Shutdown function
- parator for fault protection against overcurrent
- Op-amp for advanced current sensing
- Optimized pinout for easy board layout
- NTC for temperature control (UL 1434 CA 2 and 4)
- Moisture sensitivity level (MSL) 3 for SMD package
Applications
- 3-phase inverters for motor drives
- Roller shutters, dishwashers, refrigerator fans, air-conditioning fans, draining and recirculation pumps
Description
This SLLIMM (small low-loss intelligent molded module) nano provides a pact, high-performance AC motor drive in a simple, rugged design. It is posed of six MOSFETs and three half-bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is optimized for thermal performance and pactness in built-in motor applications, or other low power applications where assembly space is limited. This IPM includes an operational amplifier, pletely unmitted, and a parator that can be used to design a fast and efficient protection circuit. SLLIMM is a trademark of STMicroelectronics.
DS12102
- Rev 3
- August 2019 For further information contact your local STMicroelectronics sales office.
.st.
Internal schematic diagram and pin configuration
Internal schematic diagram and pin configuration
Figure 1. Internal schematic diagram
GND(1 ) T/SD/OD (2)
Vcc W(3 ) Hin W(4 ) Lin W(5 )
OP+(6 ) OPOUT(7 )
OP-(8 ) Vcc V(9 ) Hin V(10) Lin V(11 ) Cin(12) Vcc U(13 ) Hin U(14) T/SD/OD(15) Lin U(16 )
VCC HIN
OUT LVG
SD/OD LIN Vboot
GND...
