STD8010 Datasheet | STMicroelectronics

DESCRIPTION STMicroelectronics has developed an audio/video full-duplex Codec for low-cost bo devices. The STd8010, equipped with open and scalable architectures, brings audio/video encoding for DVD or HDD recording, state-of-the art DVD .. player and recorder features , STB, networking and PVR. TV watch and record, time shift, DV movie transfer to disc, MPEG4 decoding and encoding, DVD audio are many functions supported by this device. The STd8010 offers manufacturers of STB, DVD recorder, PVR and convergence products a costeffective solution with an unrivalled set of features , and flexibility. Package (35x35 mm² PBGA) xxxx Figure 1. STd8010 application diagram Rev. 1 December 2005 1/3 FEATURES - Host processor - ST231 processor at 400 MHz, with TLB support for Linux and OS21 operating systems - 3 processing cores providing up to 4.5 GOPs of processing power - - - Virtualizer: ST Omni Surround™ - 4 x 2-channel PCM outputs, - IEC60958-IEC61937 digital output DVD sub-picture decoder high performance picture position - Multi plane: background, still picture, video, sub-picture, graphics, PIP, cursor - 2D graphics accelerator - Adaptive anti-flicker - Video encoder - Based on the ST231 processor 400 MHz - Real time MPEG2 MP at ML encode - Real time Div X encode - Pre-processing for superior image quality Multi-format video outputs - CVBS, Y/C, RGB and YUV outputs with 10-bit DAC at 54 MHz - PAL/NTSC/SECAM encoder - HD analog output and simultaneous interlaced/progressive outputs - HD digital output through HDMI - Macrovision 7.1 and 1.0 (525p) - Constant .. and variable bit-rate encoding - D1 interface input: 720x480 (576) at 30 fps (25 fps) - Audio encoding - Based on the ST231 processor at 400 MHz - Dolby® stereo, MPEG1 layer 2, MP3 - Memory interfaces - Unified DDR memory up to 166 MHz - Generic host interface supporting flash memory, ATAPI interface (PIO modes), SRAM like devices, SDRAM - Digital video decoder - DV to MPEG2 format conversion -...