Datasheet4U Logo Datasheet4U.com

ST619LB - DC-DC CONVERTER REGULATED 5V CHARGE PUMP

Description

The ST619LB is a step-up charge pump DC-DC converter which delivers a regulated 5V ±4% output at 30mA and over temperature.

The input voltage range is 2V to 3.6V (two battery cells).

It requires only four external capacitor: two 0.22µF flying capacitors, and 10µF capacitors at the input and output.

📥 Download Datasheet

📁 Similar Datasheet

  • ST615 - PHOTOTRANSISTORS (KODENSHI)
  • ST60-40MF - TVS (SHINDENGEN)
  • ST60-48MF - TVS (SHINDENGEN)
  • ST6006 - N Channel Enchancement Mode MOSFET (Stanson Technology)
  • ST601 - PHOTOTRANSISTORS (KODENSHI)
  • ST60100 - Silicon Dual Power Rectifier (Microsemi Corporation)
  • ST60100C - SCHOTTKY RECTIFIER (SMC Diode)
  • ST6020 - Silicon Dual Power Rectifier (Microsemi Corporation)
  • ST6040 - Silicon Dual Power Rectifier (Microsemi Corporation)
  • ST6060 - Silicon Dual Power Rectifier (Microsemi Corporation)
Other Datasheets by ST Microelectronics

Full PDF Text Transcription

Click to expand full text
ST619LB SERIES DC-DC CONVERTER REGULATED 5V CHARGE PUMP s s s s s s s REGULATED 5V ±4% CHARGE PUMP OUTPUT CURRENT GUARANTEED OVER TEMPERATURE : 20mA (VI ≥ 2V ), 30mA (VI ≥ 3V ) NO INDUCTORS; VERY LOW EMI NOISE USES SMALL, INEXPENSIVE CAPACITORS LOGIC CONTROLLED 1µA MAX SHUT-DOWN SUPPLY CURRENT SHUT DOWN DISCONNECTS LOAD FROM INPUT AVAILABLE IN SO-8 AND DIP-8 PACKAGES DIP-8 SO-8 DESCRIPTION The ST619LB is a step-up charge pump DC-DC converter which delivers a regulated 5V ±4% output at 30mA and over temperature. The input voltage range is 2V to 3.6V (two battery cells). It requires only four external capacitor: two 0.22µF flying capacitors, and 10µF capacitors at the input and output.
Published: |