Datasheet4U Logo Datasheet4U.com

ST25R3910 - Mid-range HF reader

Description

The ST25R3910 is a

Features

  • Close loop adjustment of ASK modulation for accurate control of modulation depth in case of ISO-14443B protocol.
  • Low power (3.5 μA) NFC target mode.
  • AM/PM demodulator.
  • Accurate RF envelope measurement (8-bit A/D converter).
  • High output power at 3.3 V power supply:.
  • Up to 700 mW in case regulator is externally shorted.
  • Up to 500 mW in case of differential output when antenna trimming is used.
  • Up to 125 mW in case of single e.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST250-75L2MI Wet Tantalum Capacitors Vishay
ST25C01 SERIAL 1K 128 x 8 EEPROM ST Microelectronics
ST25C04 4-Kbit Serial I2C Bus EEPROM ST Microelectronics
ST25C08 8-Kbit Serial I2C Bus EEPROM ST Microelectronics
ST25C16 16-Kbit Serial I2C Bus EEPROM ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
ST25R3911B High performance HF reader / NFC initiator
ST25R3912 High performance HF reader / NFC initiator
ST25R3914 Automotive high performance reader / NFC initiator
ST25R3915 Automotive high performance reader / NFC initiator
ST25R3916 High performance NFC universal device and EMVCo reader

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ST25R3910 Mid-range HF reader with 0.7 W supporting AAT QFN32 Features • Close loop adjustment of ASK modulation for accurate control of modulation depth in case of ISO-14443B protocol • Low power (3.5 μA) NFC target mode • AM/PM demodulator • Accurate RF envelope measurement (8-bit A/D converter) • High output power at 3.3 V power supply: – Up to 700 mW in case regulator is externally shorted – Up to 500 mW in case of differential output when antenna trimming is used – Up to 125 mW in case of single ended output when antenna trimming is used • Squelch for gain reduction, to compensate for noise generated by tag processing • Automatic Antenna tuning (AAT) • Transparent mode • Amplitude and phase measurement • Supporting 13.56 MHz and 27.
Published: |