Datasheet4U Logo Datasheet4U.com

ST25DV02K-W1 - Dynamic NFC/RFID tag-IC

General Description

The ST25DV02K-W1/2 is an ISO 15693 and NFC Forum Type 5 tag, with one or two pulse width modulation (PWM) outputs and 2 Kbits of electrically erasable programmable memory (EEPROM).

It offers two interfaces.

Key Features

  • Pulse width modulation outputs.
  • Two independent outputs: 1x PWM output on ST25DV02K-W1, 2x PWM outputs on ST25DV02K-W2.
  • From 488 Hz to 31250 Hz.
  • 62.5 ns pulse width resolution: from 15-bit resolution at 488 Hz to 9-bit resolution at 31.25 kHz.
  • Accuracy: ±10% over temperature range.
  • No need for external oscillator.
  • Supply voltage from 1.8 V to 5.5 V, independent from contactless interface.
  • Independent push-pull outputs.
  • Up to.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST250-75L2MI Wet Tantalum Capacitors Vishay
ST25C01 SERIAL 1K 128 x 8 EEPROM ST Microelectronics
ST25C04 4-Kbit Serial I2C Bus EEPROM ST Microelectronics
ST25C08 8-Kbit Serial I2C Bus EEPROM ST Microelectronics
ST25C16 16-Kbit Serial I2C Bus EEPROM ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
ST25DV02K-W2 Dynamic NFC/RFID tag-IC
ST25DV04K Dynamic NFC/RFID tag-IC
ST25DV04KC Dynamic NFC/RFID tag-IC
ST25DV16K Dynamic NFC/RFID tag-IC
ST25DV16KC Dynamic NFC/RFID tag-IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ST25DV02K-W1 ST25DV02K-W2 Datasheet Dynamic NFC/RFID tag IC with up to two PWM outputs and 2-Kbit EEPROM SO8 TSSOP8 Product status link ST25DV02K-W1 ST25DV02K-W2 Features Pulse width modulation outputs • Two independent outputs: 1x PWM output on ST25DV02K-W1, 2x PWM outputs on ST25DV02K-W2 • From 488 Hz to 31250 Hz • 62.5 ns pulse width resolution: from 15-bit resolution at 488 Hz to 9-bit resolution at 31.25 kHz • Accuracy: ±10% over temperature range • No need for external oscillator • Supply voltage from 1.8 V to 5.