Datasheet4U Logo Datasheet4U.com

RHRDAC121 - 12-bit D/A converter

Description

The RHRDAC121 is a 12-bit voltage-output digital-to-analog converter that can operate from 2.3 V to 3.6 V power supply drawing a very low current consumption, with an internal voltage referencing.

Features

  • 12-bit architecture.
  • Ensured monotonicity.
  • Rail-to-rail voltage output.
  • Power-on-reset to zero volt output.
  • Internal voltage reference.
  • SYNC interrupt facility.
  • 2.3 V to 3.6 V power supply range.
  • Power-down function.
  • Guaranteed over -55 °C to +125 °C ambient temperature.
  • Hermetic package.
  • 100 krad(Si) TID.
  • SEL-free up to 125 MeV. cm²/mg.
  • SMD: 5962R21208.
  • Mass: 0.42 g Appl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RHRD4120 4A/ 1200V Hyperfast Diodes Intersil Corporation
RHRD4120S 4A/ 1200V Hyperfast Diodes Intersil Corporation
RHRD440 4A/ 400V - 600V Hyperfast Diodes Fairchild Semiconductor
RHRD440 RHRD4120 RHRD4120S Intersil Corporation
RHRD440CC 4A/ 400V - 600V Hyperfast Dual Diodes Intersil Corporation

Other Datasheets by STMicroelectronics

Part Number Description
RHRPM4424 Rad-hard 4.5A dual low-side MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product status link RHRDAC121 RHRDAC121 Datasheet Rad-hard, 12-bit D/A converter Features • 12-bit architecture • Ensured monotonicity • Rail-to-rail voltage output • Power-on-reset to zero volt output • Internal voltage reference • SYNC interrupt facility • 2.3 V to 3.6 V power supply range • Power-down function • Guaranteed over -55 °C to +125 °C ambient temperature • Hermetic package • 100 krad(Si) TID • SEL-free up to 125 MeV.cm²/mg • SMD: 5962R21208 • Mass: 0.42 g Application • Satellite equipment • Telemetry • Housekeeping Description The RHRDAC121 is a 12-bit voltage-output digital-to-analog converter that can operate from 2.3 V to 3.6 V power supply drawing a very low current consumption, with an internal voltage referencing.
Published: |