Datasheet4U Logo Datasheet4U.com

PB137 - POSITIVE VOLTAGE REGUALTOR FOR BATTERY CHARGER

Description

The PB137 is a positive voltage regulator able to provide 1.5A, at VOUT=13.7V and is intended as a charger for lead acid battery.

The main feature is a reverse leakage current (Max 10µA at TJ =0 to 40oC VIN = floating and VOUT = 13.7V).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PB134005 General Purpose Low Power PCB Relays TE
PB134006 General Purpose Low Power PCB Relays TE
PB134012 General Purpose Low Power PCB Relays TE
PB134024 General Purpose Low Power PCB Relays TE
PB1000 10A SINGLE PHASE BRIDGE RECTIFIER WON-TOP

Other Datasheets by STMicroelectronics

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® PB137 POSITIVE VOLTAGE REGUALTOR FOR BATTERY CHARGER s s s s s REVERSE LEAKAGE CURRENT LESS THAN 10 µA THREE TERMINAL FIXED VERSION (13.7V) OUTPUT CURRENT IN EXCESS OF 1.5A AVAILABLEIN ± 1% (AC) SELECTION AT 25oC TYPICAL DROPOUT VOLTAGE 2V TEMPERATURE RANGE 0oC TO 150oC DESCRIPTION The PB137 is a positive voltage regulator able to provide 1.5A, at VOUT=13.7V and is intended as a charger for lead acid battery. The main feature is a reverse leakage current (Max 10µA at TJ =0 to 40oC VIN = floating and VOUT = 13.7V). It is available in TO-220 and it employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat-sinking is provided, they can deliver over 1A output current.
Published: |