MLPF-WB-04D3 Datasheet 2.4GHz low pass filter

Manufacturer: STMicroelectronics

MLPF-WB-04D3 2.4ghz low pass filter by STMicroelectronics - Datasheet Preview

Datasheet Details

Part number	MLPF-WB-04D3
Manufacturer	STMicroelectronics
File Size	2.19 MB
Description	2.4GHz low pass filter
Datasheet	MLPF-WB-04D3 Datasheet

General Description

The MLPF-WB-04D3 integrates an impedance matching network and harmonics filter.

The matching impedance network has been tailored to maximize the RF performances of STM32WBA52, STM32WBA54, and STM32WBA55.

The MLPF-WB-04D3 uses STMicroelectronics IPD technology on non-conductive glass substrate which optimizes RF performances.

Overview

MLPF-WB-04D3 Datasheet 2.4 GHz low pass filter matched to STM32WBA52, STM32WBA54, and STM32WBA55 Chip scale package on glass 6 bumps Pin-out top diagram (top view - bumps down) IN GND3 GND4 GND2 OUT GND1 Product status.

Key Features

Integrated impedance matching to.
STM32WBA52CxUx, STM32WBA54CxUx, and STM32WBA55CxUx in UFQFPN48 package.
STM32WBA52KxUx, STM32WBA54KxUx, and STM32WBA55KxUx in UFQFPN32 package.
50 Ω nominal impedance on antenna side.
Deep rejection harmonics filter.
Low insertion loss.
Small footprint.
Low profile ≤ 630 μm after reflow.
High RF performances.
RF BOM and area reduction.
ECOPACK2 compliant component.

More Datasheets from STMicroelectronics

Part Number	Description
MLPF-WB-01D3	2.4GHz low pass filter
MLPF-WB-01E3	2.4GHz low pass filter
MLPF-WB-02D3	2.4GHz low pass filter
MLPF-WB55-01E3	2.4GHz low pass filter
MLPF-WB55-02E3	2.4GHz low pass filter
MLPF-NRG-01D3	2.4GHz low pass filter