Datasheet4U Logo Datasheet4U.com

MLPF-WB-01E3 - 2.4GHz low pass filter

General Description

The MLPF-WB-01E3 integrates an impedance matching network and harmonics filter.

The matching impedance network has been tailored to maximize the RF performance of STM32WB.

This device uses STMicroelectronics IPD technology on non-conductive cup of glass substrate which optimizes RF performance.

Key Features

  • Integrated impedance matching to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx.
  • LGA footprint compatible.
  • 50 Ω nominal impedance on antenna side.
  • Deep rejection harmonics filter.
  • Low insertion loss.
  • Small footprint.
  • Low thickness ≤ 450 μm.
  • High RF performance.
  • RF BOMBER and area reduction.
  • ECOPACK2 compliant.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MLP1N06 VOLTAGE CLAMPED CURRENT LIMITING MOSFET Motorola
MLP1N06CL VOLTAGE CLAMPED CURRENT LIMITING MOSFET Motorola
MLP1N06CL MOSFET ON Semiconductor
MLP2012 INDUCTORS TDK
MLP2N06CL VOLTAGE CLAMPED CURRENT LIMITING MOSFET Motorola

Other Datasheets by STMicroelectronics

Part Number Description
MLPF-WB-01D3 2.4GHz low pass filter
MLPF-WB-02D3 2.4GHz low pass filter
MLPF-WB-04D3 2.4GHz low pass filter
MLPF-WB55-01E3 2.4GHz low pass filter
MLPF-WB55-02E3 2.4GHz low pass filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MLPF-WB-01E3 Datasheet 2.4 GHz low pass filter matched to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx Top view (pads down) OUT GND3 GND4 GND2 IN GND1 Product status link MLPF-WB-01E3 Features • Integrated impedance matching to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx • LGA footprint compatible • 50 Ω nominal impedance on antenna side • Deep rejection harmonics filter • Low insertion loss • Small footprint • Low thickness ≤ 450 μm • High RF performance • RF BOMBER and area reduction • ECOPACK2 compliant Applications • Bluetooth 5 • OpenThread • Zigbee® • IEEE 802.15.4 • Optimized for STM32WB55Cx/Rx, STM32WB5, STM32WB50Cx, Description The MLPF-WB-01E3 integrates an impedance matching network and harmonics filter.