Datasheet4U Logo Datasheet4U.com

M8813F1W - In-System Programmable ISP Multiple-Memory/Logic

Description

The FLASH+PSD family of memory systems for microcontrollers (MCUs) brings In-SystemTable 1.

Features

  • an optimized Macrocell logic architecture. The Macrocell was created to address the unique requirements of embedded system designs. It allows direct connection between the system address/data bus, and the internal FLASH+PSD Table 2. Product Range1 Part Number M8813F1Y M8813F2Y M8834F2Y M8813F1W M8813F2W M8834F2W Primary Flash Memory 1 Mbit 1 Mbit 2 Mbit 1 Mbit 1 Mbit 2 Mbit Secondary NVM 256 Kbit EEPROM 256 Kbit Flash memory 256 Kbit Flash memory 256 Kbit EEPROM 256 Kbit Flash memory 256 Kbit F.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M88 TRIPLE-BALANCED MIXER Tyco Electronics
M88 Triple-Balanced Mixer MA-COM
M8870 DTMF Receiver Clare
M88C TRIPLE-BALANCED MIXER Tyco Electronics
M88C Triple-Balanced Mixer MA-COM

Other Datasheets by STMicroelectronics

Part Number Description
M8813F1Y In-System Programmable ISP Multiple-Memory/Logic
M8813F2W In-System Programmable ISP Multiple-Memory/Logic
M8813F2Y In-System Programmable ISP Multiple-Memory/Logic
M88 In-System Programmable ISP Multiple-Memory/Logic
M8834F2W In-System Programmable ISP Multiple-Memory and Logic

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M88 FAMILY In-System Programmable (ISP) Multiple-Memory and Logic FLASH+PSD Systems (with CPLD) for MCUs DATA BRIEFING s s Single Supply Voltage: – 5 V±10% for M88xxFxY – 3 V (+20/–10%) for M88xxFxW 1 or 2 Mbit of Primary Flash Memory (8 uniform sectors, 16K x 8, or 32K x 8) A second non-volatile memory: – 256 Kbit (32K x 8) EEPROM (for M8813F1x) or Flash memory (for M88x3F2x) – 4 uniform sectors (8K x 8) SRAM (16 Kbit, 2K x 8; or 64 Kbit, 8K x 8) Over 3,000 Gates of PLD: DPLD and CPLD 27 Reconfigurable I/O ports Enhanced JTAG Serial Port Programmable power management Stand-by current: – 50 µA for M88xxFxY – 25 µA for M88xxFxW High Endurance: – 100,000 Erase/Write Cycles of Flash Memory – 10,000 Erase/Write Cycles of EEPROM – 1,000 Erase/Write Cycles of PLD PQFP52 (T) s s s s s s s s
Published: |