Datasheet4U Logo Datasheet4U.com

M29W008AT - 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory

Description

The M29W008A is a non-volatile memory that may be erased electrically at the block or chip level and programmed in-system on a Byte-by-Byte basis using only a single 2.7V to 3.6V VCC supply.

For Program and Erase operations the necessary high voltages are generated internally.

Features

  • coders and sense amplifiers. E High deselects the memory and reduces the power consumption to.

📥 Download Datasheet

Datasheet Details

Part number M29W008AT
Manufacturer STMicroelectronics
File Size 218.02 KB
Description 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory
Datasheet download datasheet M29W008AT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M29W064FB 64-Mbit 3V supply flash memory Numonyx
M29W064FT 64-Mbit 3V supply flash memory Numonyx
M29W116BB 16 Mbit Low Voltage Single Supply Flash Memory STMicroelectronics
M29W116BT 16 Mbit Low Voltage Single Supply Flash Memory STMicroelectronics
M29W128FH 128 Mbit 3V Supply Flash Memory Numonyx

Other Datasheets by STMicroelectronics

Part Number Description
M29W008AB 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory
M29W008B 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory
M29W008DB 8 Mbit 3V Supply Flash Memory
M29W008DT 8 Mbit 3V Supply Flash Memory
M29W008T 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory

Full PDF Text Transcription

Click to expand full text
M29W008AT M29W008AB 8 Mbit (1Mb x8, Boot Block) Low Voltage Single Supply Flash Memory s 2.7V to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 80ns PROGRAMMING TIME: 10µs typical PROGRAM/ERASE CONTROLLER (P/E.C.) – Program Byte-by-Byte – Status Register bits and Ready/Busy Output s s s s s s SECURITY PROTECTION MEMORY AREA INSTRUCTIONS ADDRESS CODING: 3 digits MEMORY BLOCKS – Boot Block (Top or Bottom location) – Parameter and Main blocks TSOP40 (N) 10 x 20mm s s BLOCK, MULTI-BLOCK and CHIP ERASE MULTI BLOCK PROTECTION/TEMPORARY UNPROTECTION MODES ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.
Published: |