Datasheet4U Logo Datasheet4U.com

L6562 - TRANSITION-MODE PFC CONTROLLER

Description

www.DataSheet4U.com 1.1 APPLICATIONS

The L6562 is a current-mode PFC controller operating in Transition Mode (TM).

Pin-to-pin compatible with the predecessor L6561, it offers improved performance.

Figure 2.

Features

  • es.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L6563 Advanced transition-mode PFC controller ST Microelectronics
L6563A Advanced transition-mode PFC controller ST Microelectronics
L6563H High voltage start-up transition-mode PFC ST Microelectronics
L6570A 2-CHANNEL FLOPPY DISK READ/WRITE CIRCUITS ST Microelectronics
L6570B 2-CHANNEL FLOPPY DISK READ/WRITE CIRCUITS ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
L6562A Transition-mode PFC controller
L6562AT Transition-mode PFC controller
L6560 POWER FACTOR CORRECTOR
L6560A POWER FACTOR CORRECTOR
L6561 POWER FACTOR CORRECTOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
L6562 TRANSITION-MODE PFC CONTROLLER 1 ■ ■ Features REALISED IN BCD TECHNOLOGY TRANSITION-MODE CONTROL OF PFC PREREGULATORS PROPRIETARY MULTIPLIER DESIGN FOR MINIMUM THD OF AC INPUT CURRENT VERY PRECISE ADJUSTABLE OUTPUT OVERVOLTAGE PROTECTION ULTRA-LOW (≤70µA) START-UP CURRENT LOW (≤4 mA) QUIESCENT CURRENT EXTENDED IC SUPPLY VOLTAGE RANGE ON-CHIP FILTER ON CURRENT SENSE DISABLE FUNCTION 1% (@ Tj = 25 °C) INTERNAL REFERENCE VOLTAGE -600/+800mA TOTEM POLE GATE DRIVER WITH UVLO PULL-DOWN AND VOLTAGE CLAMP DIP-8/SO-8 PACKAGES ECOPACK® PFC PRE-REGULATORS FOR: – IEC61000-3-2 COMPLIANT SMPS Figure 1. Packages ■ DIP-8 SO-8 ■ Table 1.
Published: |