Datasheet4U Logo Datasheet4U.com

L6364 - Dual-channel transceiver

Description

The L6364 is a dual channel transceiver for industrial sensor applications.

It has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signaling cable.

Features

  • Supply voltage from 5 V to 35 V.
  • 2.5 V to 5 V compatible I/Os.
  • 3.3 V and 5 V, 50 mA linear regulators.
  • 50 mA DC-DC regulator with configurable frequency (0.5 MHz to 2 MHz) & voltage (5 V to 10.5 V).
  • Low dissipative (5 Ω) CQ and DIO output stages configurable in high side, low side, push/pull.
  • Configurable reporting threshold (0.11 A to 0.25 A) of current limitation for CQ and DIO lines.
  • Configurable reporting threshold (0.22 A to 0.

📥 Download Datasheet

📁 Similar Datasheet

  • L634 - THREE PHASE MOTOR DRIVER (ST Microelectronics)
  • L6372 - Dual N-Channel MOSFET (VBsemi)
  • L6375S - 0.5A High Side Driver Industrial Intelligent Power Switch (ST Microelectronics)
  • L6382D - Power management unit (ST Microelectronics)
  • L6388 - HIGH-VOLTAGE HIGH AND LOW SIDE DRIVER (ST Microelectronics)
Other Datasheets by STMicroelectronics
  • L6360 - IO-Link communication master transceiver
  • L6362 - Fully integrated device transceiver IC
  • L6362A - IO-Link communication transceiver
  • L6316 - 4-CHANNEL LOW POWER PREAMPLIFIER
  • L6370Q - 2.5 A single high-side smart power switch
  • L6382D5 - Power management unit
  • L6384 - HIGH-VOLTAGE HALF BRIDGE DRIVER
  • L6384E - High voltage half-bridge driver

Full PDF Text Transcription

Click to expand full text
L6364 Datasheet Dual channel transceiver IC for SIO and IO-Link sensor applications Product status link L6364 Features • Supply voltage from 5 V to 35 V • 2.5 V to 5 V compatible I/Os • 3.3 V and 5 V, 50 mA linear regulators • 50 mA DC-DC regulator with configurable frequency (0.5 MHz to 2 MHz) & voltage (5 V to 10.5 V) • Low dissipative (5 Ω) CQ and DIO output stages configurable in high side, low side, push/pull • Configurable reporting threshold (0.11 A to 0.25 A) of current limitation for CQ and DIO lines • Configurable reporting threshold (0.22 A to 0.
Published: |